MAX32670 Target Family Info

Features Supported

GPIO Interrupts: GPIO input pin interrupt support
GPIO Port I/O: Driver for using an entire GPIO port as a bidirectional I/O port.
Sleep: Support for sending the processor to sleep when no threads/ISRs are executing.
Flash IAP: Driver allowing In-Application Programming (IAP) of the MCU flash memory.
RTC: Real-Time Clock. Clock which keeps track of real world time, usually using a low frequency, accurate clock.
GPIO Port Input: Driver for reading from an entire GPIO port at a time
Serial (UART): Support for buffered and unbuffered serial (UART) ports
SPI Controller/Master: Serial Peripheral Interface (SPI) controller/master mode
μs Ticker: Clock peripheral with at least microsecond resolution that Mbed uses to implement Timer and Ticker.
Low-Precision Ticker: Also known as the Low-Power Ticker, this peripheral keeps time at a low-frequency clock (usually 32kHz) and generates events for the application. Usually it is used to implement low power sleep.
Watchdog: Peripheral which resets the chip if software doesn't service it within a configurable amount of time. Used to guard against software hangs.
GPIO Port Output: Driver for writing to an entire GPIO port at a time
Serial RTS/CTS Flow Control: Serial (UART) peripheral supports using RTS and/or CTS pins for hardware flow control.
I2C Controller/Master: I2C driver for synchronous (blocking) controller/master mode

Board	MCU Part Number	Extra Features	Extra Peripheral Drivers	Components	RAM Banks	Flash Banks
MAX32670EVKIT	MAX32670				IRAM1: 159 kiB	IROM1: 383 kiB
XDOT_MAX32670	MAX32670				IRAM1: 159 kiB	IROM1: 383 kiB