MCU_LPC546XX Target Family Info

Back to Target Families Index ^

Features Supported

Peripheral Drivers Supported

• μs Ticker: Clock peripheral with at least microsecond resolution that Mbed uses to implement Timer and Ticker.
• I2C Controller/Master: I2C driver for synchronous (blocking) controller/master mode
• I2C Peripheral/Slave: I2C for interrupt-based peripheral/slave mode
• Sleep: Support for sending the processor to sleep when no threads/ISRs are executing.
• True Random Number Generator: Cryptographic-grade True Random Number Generator (TRNG). This is required to implement SSL communications securely unless you provision devices with an entropy seed stored in nonvolatile storage.
• GPIO Port Input: Driver for reading from an entire GPIO port at a time
• Memory Protection Unit: Mbed supports configuring the MPU on this device to disable writing to ROM and executing from RAM.
• Flash IAP: Driver allowing In-Application Programming (IAP) of the MCU flash memory.
• Ethernet MAC: Ethernet MAC peripheral driver. Combine the MAC with a PHY chip to connect to Ethernet networks.
• SPI Controller/Master: Serial Peripheral Interface (SPI) controller/master mode
• RTC: Real-Time Clock. Clock which keeps track of real world time, usually using a low frequency, accurate clock.
• GPIO Port Output: Driver for writing to an entire GPIO port at a time
• GPIO Interrupts: GPIO input pin interrupt support
• GPIO Port I/O: Driver for using an entire GPIO port as a bidirectional I/O port.
• SPI Peripheral/Slave: Serial Peripheral Interface (SPI) device/slave mode
• Serial (UART): Support for buffered and unbuffered serial (UART) ports
• Analog Inputs: Analog input (ADC) peripheral driver

Boards in this Target Family

Board	MCU Part Number	Extra Features	Extra Peripheral Drivers	Components	RAM Banks	Flash Banks
LPC546XX	LPC54628J512ET180		Quad SPI	SFDP QuadSPI Flash	SRAMX: 32 kiB SRAM_UPPER: 160 kiB USB_RAM: 8 kiB	EEPROM: 16 kiB PROGRAM_FLASH: 512 kiB
FF_LPC546XX	LPC54628J512ET180				SRAMX: 32 kiB SRAM_UPPER: 160 kiB USB_RAM: 8 kiB	EEPROM: 16 kiB PROGRAM_FLASH: 512 kiB

Inheritance Graph