MCU_MAX32620 Target Family Info

Features Supported

GPIO Port Output: Driver for writing to an entire GPIO port at a time
Analog Inputs: Analog input (ADC) peripheral driver
μs Ticker: Clock peripheral with at least microsecond resolution that Mbed uses to implement Timer and Ticker.
PWM Out: Pulse Width Modulation (PWM) generator peripheral driver
Serial RTS/CTS Flow Control: Serial (UART) peripheral supports using RTS and/or CTS pins for hardware flow control.
Flash IAP: Driver allowing In-Application Programming (IAP) of the MCU flash memory.
Low-Precision Ticker: Also known as the Low-Power Ticker, this peripheral keeps time at a low-frequency clock (usually 32kHz) and generates events for the application. Usually it is used to implement low power sleep.
I2C Controller/Master: I2C driver for synchronous (blocking) controller/master mode
GPIO Port Input: Driver for reading from an entire GPIO port at a time
GPIO Interrupts: GPIO input pin interrupt support
Sleep: Support for sending the processor to sleep when no threads/ISRs are executing.
SPI Controller/Master: Serial Peripheral Interface (SPI) controller/master mode
Serial (UART): Support for buffered and unbuffered serial (UART) ports
GPIO Port I/O: Driver for using an entire GPIO port as a bidirectional I/O port.

Board	MCU Part Number	Extra Features	Extra Peripheral Drivers	Components	RAM Banks	Flash Banks
MAX32620FTHR	MAX32620				IRAM1: 128 kiB	IROM1: 2048 kiB
SDT32620B	MAX32620				IRAM1: 128 kiB	IROM1: 2048 kiB