MCU_STM32H5 Target Family Info

Back to Target Families Index ^

Features Supported

Peripheral Drivers Supported

• GPIO Port I/O: Driver for using an entire GPIO port as a bidirectional I/O port.
• SPI Controller/Master: Serial Peripheral Interface (SPI) controller/master mode
• Memory Protection Unit: Mbed supports configuring the MPU on this device to disable writing to ROM and executing from RAM.
• CAN: Controller Area Network (CAN) peripheral driver
• Watchdog: Peripheral which resets the chip if software doesn't service it within a configurable amount of time. Used to guard against software hangs.
• I2C Peripheral/Slave: I2C for interrupt-based peripheral/slave mode
• SPI Peripheral/Slave: Serial Peripheral Interface (SPI) device/slave mode
• CAN FD: CAN Flexible Datarate (FD) support in CAN driver
• Flash IAP: Driver allowing In-Application Programming (IAP) of the MCU flash memory.
• I2C Controller/Master: I2C driver for synchronous (blocking) controller/master mode
• RTC: Real-Time Clock. Clock which keeps track of real world time, usually using a low frequency, accurate clock.
• Serial (UART): Support for buffered and unbuffered serial (UART) ports
• Sleep: Support for sending the processor to sleep when no threads/ISRs are executing.
• Async SPI: Allows use of SPI controller mode in the background via interrupts and/or DMA.
• GPIO Port Output: Driver for writing to an entire GPIO port at a time
• Async I2C Controller/Master: Driver allowing I2C controller mode to be used in the background via interrupts and/or DMA.
• GPIO Port Input: Driver for reading from an entire GPIO port at a time
• GPIO Interrupts: GPIO input pin interrupt support
• μs Ticker: Clock peripheral with at least microsecond resolution that Mbed uses to implement Timer and Ticker.
• Hardware CRC: Driver for CRC Accelerator peripheral, used to accelerate certain CRC computations.
• True Random Number Generator: Cryptographic-grade True Random Number Generator (TRNG). This is required to implement SSL communications securely unless you provision devices with an entropy seed stored in nonvolatile storage.
• PWM Out: Pulse Width Modulation (PWM) generator peripheral driver
• Analog Inputs: Analog input (ADC) peripheral driver
• Reset Reason: Support for determining the cause of the most recent MCU reset.

Boards in this Target Family

Board	MCU Part Number	Extra Features	Extra Peripheral Drivers	Components	RAM Banks	Flash Banks
NUCLEO_H503RB	STM32H503RBTx				SRAM1: 16 kiB SRAM2: 16 kiB	Flash: 128 kiB
NUCLEO_H563ZI	STM32H563ZITx		USB Device, Analog Outputs, Ethernet MAC		SRAM1_2_3: 640 kiB SRAM_BKUP: 4 kiB	Flash: 2048 kiB
DISCO_H573I	STM32H573IIKxQ		Quad SPI, USB Device, Octal SPI, Ethernet MAC, Analog Outputs	SFDP Octal SPI Flash	SRAM1_2_3: 640 kiB SRAM_BKUP: 4 kiB	Flash: 2048 kiB

Inheritance Graph