Test Case Output

Back to test-mbed-drivers-dev-null Results ^

Target: ARDUINO_NICLA_SENSE_ME
Test: test-mbed-drivers-dev-null
Test Case: test-mbed-drivers-dev-null

[1/1] Flashing test-mbed-drivers-dev-null with OpenOCD...
Open On-Chip Debugger 0.12.0+dev-01828-g5233312ea (2025-01-05-08:54)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'gdb port', not 'gdb_port'
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: FW Version = v1.0
Info : CMSIS-DAP: Serial# = D5CCE554
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 1000 kHz
Info : SWD DPIDR 0x2ba01477
Info : [nrf52.cpu] Cortex-M4 r0p1 processor detected
Info : [nrf52.cpu] target has 6 breakpoints, 4 watchpoints
Info : [nrf52.cpu] Examination succeed
Info : [nrf52.cpu] gdb port disabled
[nrf52.cpu] halted due to breakpoint, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000534 msp: 0x20010000
** Programming Started **
Info : nRF52832-CIAA(build code: E0) 512kB Flash, 64kB RAM
Warn : Adding extra erase range, 0x000061d8 .. 0x00006fff
** Programming Finished **
** Resetting Target **
shutdown command invoked
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyARDUINO_NICLA_SENSE_ME --skip-reset -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m ARDUINO_NICLA_SENSE_ME --baud-rate=115200
[+347ms][HTST][INF] host test executor ver. 0.0.16
[+347ms][HTST][INF] copy image onto target... SKIPPED!
[+349ms][HTST][INF] starting host test process...
[+352ms][CONN][INF] starting connection process...
[+352ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+352ms][CONN][INF] initializing serial port listener... 
[+352ms][SERI][INF] using specified port '/dev/ttyARDUINO_NICLA_SENSE_ME'
[+352ms][SERI][INF] serial(port=/dev/ttyARDUINO_NICLA_SENSE_ME, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+352ms][HTST][INF] setting timeout to: 60 sec
[+353ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+353ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+353ms][CONN][INF] sending preamble '11ec2d0e-2585-4d5d-9257-f0a658ed9de9'
[+353ms][SERI][TXD] {{__sync;11ec2d0e-2585-4d5d-9257-f0a658ed9de9}}
[+374ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+374ms][CONN][INF] found SYNC in stream: {{__sync;11ec2d0e-2585-4d5d-9257-f0a658ed9de9}} it is #0 sent, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[+374ms][HTST][INF] sync KV found, uuid=11ec2d0e-2585-4d5d-9257-f0a658ed9de9, timestamp=1736357485.329786
[+374ms][HTST][INF] DUT greentea-client version: 1.3.0
[+374ms][HTST][INF] setting timeout to: 2 sec
[+394ms][CONN][RXD] MBED: before re-routing stdout to /null
[+394ms][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[+394ms][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[+394ms][HTST][INF] host test class: ''
[+394ms][HTST][INF] host test setup() call...
[+394ms][HTST][INF] CALLBACKs updated
[+394ms][HTST][INF] host test detected: dev_null_auto
[+395ms][HTST][INF] _callback_to_stdout !
[+2397ms][HTST][INF] test suite run finished after 2.02 sec...
[+2402ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+2409ms][HTST][INF] CONN exited with code: 0
[+2410ms][HTST][INF] No events in queue
[+2410ms][HTST][INF] stopped consuming events
[+2410ms][HTST][INF] host test result(): True
[+2410ms][HTST][WRN] missing __exit event from DUT
[+2410ms][HTST][WRN] missing __exit_event_queue event from host test
[+2410ms][HTST][INF] calling blocking teardown()
[+2410ms][HTST][INF] teardown() finished
[+2411ms][HTST][INF] {{result;success}}