Test Case Output

Back to test-mbed-drivers-dev-null Results ^

Target: K64F
Test: test-mbed-drivers-dev-null
Test Case: test-mbed-drivers-dev-null

[1/1] Flashing test-mbed-drivers-dev-null with OpenOCD...
Open On-Chip Debugger 0.12.0+dev-00499-g151b74371 (2024-01-22-10:06)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : add flash_bank kinetis k60.pflash
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
DEPRECATED! use 'adapter serial' not 'cmsis_dap_serial'
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: FW Version = 1.10
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 1000 kHz
Info : SWD DPIDR 0x2ba01477
Info : [k60.cpu] Cortex-M4 r0p1 processor detected
Info : [k60.cpu] target has 6 breakpoints, 4 watchpoints
Info : MDM: Chip is unsecured. Continuing.
Info : [k60.cpu] Examination succeed
Info : gdb port disabled
Info : MDM: Chip is unsecured. Continuing.
[k60.cpu] halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x000004bc msp: 0x20030000
Info : Kinetis MK64FN1M0xxx12 detected: 2 flash blocks
Info : 2 PFlash banks: 1024 KiB total
Info : Disabling Kinetis watchdog (initial WDOG_STCTRLH = 0x01d3)
Info : WDOG_STCTRLH = 0x01d2
** Programming Started **
** Programming Finished **
** Resetting Target **
Info : MDM: Chip is unsecured. Continuing.
shutdown command invoked
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3.10 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyK64F --skip-reset -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m K64F --baud-rate=115200
[1733625806.34][HTST][INF] host test executor ver. 0.0.16
[1733625806.34][HTST][INF] copy image onto target... SKIPPED!
[1733625806.35][HTST][INF] starting host test process...
[1733625806.36][CONN][INF] starting connection process...
[1733625806.36][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1733625806.37][CONN][INF] initializing serial port listener... 
[1733625806.37][SERI][INF] using specified port '/dev/ttyK64F'
[1733625806.37][SERI][INF] serial(port=/dev/ttyK64F, baudrate=115200, read_timeout=0.01, write_timeout=5)
[1733625806.37][HTST][INF] setting timeout to: 60 sec
[1733625806.37][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1733625806.37][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[1733625806.37][CONN][INF] sending preamble '6593f4d0-8e90-4cb0-8190-71754b41a80e'
[1733625806.37][SERI][TXD] {{__sync;6593f4d0-8e90-4cb0-8190-71754b41a80e}}
[1733625806.38][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[1733625806.39][CONN][INF] found SYNC in stream: {{__sync;6593f4d0-8e90-4cb0-8190-71754b41a80e}} it is #0 sent, queued...
[1733625806.39][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[1733625806.39][HTST][INF] sync KV found, uuid=6593f4d0-8e90-4cb0-8190-71754b41a80e, timestamp=1733625806.393973
[1733625806.40][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[1733625806.40][HTST][INF] DUT greentea-client version: 1.3.0
[1733625806.40][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[1733625806.40][HTST][INF] setting timeout to: 2 sec
[1733625806.40][HTST][INF] host test class: ''
[1733625806.40][HTST][INF] host test setup() call...
[1733625806.40][HTST][INF] CALLBACKs updated
[1733625806.40][HTST][INF] host test detected: dev_null_auto
[1733625806.41][CONN][RXD] MBED: before re-routing stdout to /null
[1733625806.41][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[1733625806.41][HTST][INF] _callback_to_stdout !
[1733625808.41][HTST][INF] test suite run finished after 2.02 sec...
[1733625808.42][CONN][INF] received special event '__host_test_finished' value='True', finishing
[1733625808.43][HTST][INF] CONN exited with code: 0
[1733625808.43][HTST][INF] No events in queue
[1733625808.43][HTST][INF] stopped consuming events
[1733625808.43][HTST][INF] host test result(): True
[1733625808.43][HTST][WRN] missing __exit event from DUT
[1733625808.43][HTST][WRN] missing __exit_event_queue event from host test
[1733625808.43][HTST][INF] calling blocking teardown()
[1733625808.43][HTST][INF] teardown() finished
[1733625808.43][HTST][INF] {{result;success}}