Back to test-mbed-drivers-dev-null Results ^
Target: KL25Z
Test: test-mbed-drivers-dev-null
Test Case: test-mbed-drivers-dev-null
[0/1] Flashing test-mbed-drivers-dev-null with LinkServer...
INFO: Exact match for MKL25Z4:FRDM-KL25Z found
INFO: Selected device MKL25Z128xxx4:FRDM-KL25Z
INFO: Getting available probes
INFO: Selecting probe by serial substring
INFO: Selected probe #1 0200000034544e45001700038e38000b5a91000097969900 (DAPLink CMSIS-DAP)
Ns: LinkServer RedlinkMulti Driver v25.7 (Jul 21 2025 19:38:57 - crt_emu_cm_redlink build 1038)
Pc: ( 0) Reading remote configuration
Wc(03). No cache support.
Nc: Found generic directory XML file in /tmp/tmp_1bkhm6v/crt_directory.xml
Pc: ( 5) Remote configuration complete
Nc: Reconnected to existing LinkServer process.
Wc: ============= SCRIPT: kinetisconnect.scp =============
Wc: Kinetis Connect Script
Wc: Connecting to Probe Index = 1
Wc: This probe = 1
Wc: This TAP = 0
Wc: This core = 0
Wc: DpID = 0BC11477
Wc: Assert NRESET
Wc: Reset pin state: 00
Wc: Power up Debug
Wc: MDM-AP APID: 0x001C0020
Wc: MDM-AP System Reset/Hold Reset/Debug Request
Wc: MDM-AP Control: 0x0000001C
Wc: MDM-AP Status (Flash Ready) : 0x00000032
Wc: Part is not secured
Wc: MDM-AP Control: 0x00000014
Wc: Release NRESET
Wc: Reset pin state: 01
Wc: MDM-AP Control (Debug Request): 0x00000004
Wc: MDM-AP Status: 0x0001003A
Wc: MDM-AP Core Halted
Wc: ============= END SCRIPT =============================
Nc: Probe Firmware: DAPLink CMSIS-DAP (ARM)
Nc: Serial Number: 0200000034544e45001700038e38000b5a91000097969900
Nc: VID:PID: 0D28:0204
Nc: USB Path: /dev/hidraw8
Nc: Using memory from core 0 after searching for a good core
Pc: ( 30) Emulator Connected
Pc: ( 40) Debug Halt
Pc: ( 50) CPU ID
Nc: debug interface type = CoreSight DP (DAP DP ID 0BC11477) over SWD TAP 0
Nc: processor type = Cortex-M0+ (CPU ID 00000C60) on DAP AP 0
Nc: number of h/w breakpoints = 2
Nc: number of flash patches = 0
Nc: number of h/w watchpoints = 2
Nc: Probe(0): Connected&Reset. DpID: 0BC11477. CpuID: 00000C60. Info:
Nc: Debug protocol: SWD. RTCK: Disabled. Vector catch: Disabled.
Ns: Content of CoreSight Debug ROM(s):
Nc: RBASE F0002000: CID B105100D PID 000008E000 ROM (type 0x1)
Nc: ROM 1 F0000000: CID B105900D PID 04000BB932 CSt ARM MTB type 0x31 Trace Sink - Basic trace router
Nc: ROM 1 F0001000: CID B105900D PID 000008E000 CSt MTBDWT type 0x4 Debug Control - Other
Nc: ROM 1 E00FF000: CID B105100D PID 04000BB4C0 ROM (type 0x1)
Nc: ROM 4 E000E000: CID B105E00D PID 04000BB008 Gen SCS (type 0x0)
Nc: ROM 4 E0001000: CID B105E00D PID 04000BB00A Gen DWT (type 0x0)
Nc: ROM 4 E0002000: CID B105E00D PID 04000BB00B Gen FPB (type 0x0)
Nc: NXP: MKL25Z128xxx4
Nc: DAP stride is 1024 bytes (256 words)
Nc: Inspected v.2 On chip Flash memory module FTFA_1K.cfx
Nc: Image 'SemiGeneric Jul 21 2025 18:21:10'
Nc: Opening flash driver FTFA_1K.cfx
Nc: VECTRESET requested, but not supported on ARMv6-M CPUs. Using SOFTRESET instead.
Nc: Using SOFT reset to run the flash driver
Nc: Flash variant 'KL25 FTFA Generic 1K' detected (128KB = 128*1K at 0x0)
Nc: Closing flash driver FTFA_1K.cfx
Pc: ( 65) Chip Setup Complete
Pc: ( 70) License Check Complete
Nt: Loading 'test-mbed-drivers-dev-null.bin' Binary 0x00000000 len 0xA2A8
Nc: Opening flash driver FTFA_1K.cfx (already resident)
Nc: VECTRESET requested, but not supported on ARMv6-M CPUs. Using SOFTRESET instead.
Nc: Using SOFT reset to run the flash driver
Nc: Flash variant 'KL25 FTFA Generic 1K' detected (128KB = 128*1K at 0x0)
Pb: 1 of 1 ( 0) Writing sectors 0-40 at 0x00000000 with 41640 bytes
Ps: ( 0) at 00000000: 0 bytes - 0/41640
Ps: ( 2) at 00000000: 1024 bytes - 1024/41640
Nc: 00000400 done 2% (1024 out of 41640)
Ps: ( 4) at 00000400: 1024 bytes - 2048/41640
Nc: 00000800 done 4% (2048 out of 41640)
Ps: ( 7) at 00000800: 1024 bytes - 3072/41640
Nc: 00000C00 done 7% (3072 out of 41640)
Ps: ( 9) at 00000C00: 1024 bytes - 4096/41640
Nc: 00001000 done 9% (4096 out of 41640)
Ps: ( 12) at 00001000: 1024 bytes - 5120/41640
Nc: 00001400 done 12% (5120 out of 41640)
Ps: ( 14) at 00001400: 1024 bytes - 6144/41640
Nc: 00001800 done 14% (6144 out of 41640)
Ps: ( 17) at 00001800: 1024 bytes - 7168/41640
Nc: 00001C00 done 17% (7168 out of 41640)
Ps: ( 19) at 00001C00: 1024 bytes - 8192/41640
Nc: 00002000 done 19% (8192 out of 41640)
Ps: ( 22) at 00002000: 1024 bytes - 9216/41640
Nc: 00002400 done 22% (9216 out of 41640)
Ps: ( 24) at 00002400: 1024 bytes - 10240/41640
Nc: 00002800 done 24% (10240 out of 41640)
Ps: ( 27) at 00002800: 1024 bytes - 11264/41640
Nc: 00002C00 done 27% (11264 out of 41640)
Ps: ( 29) at 00002C00: 1024 bytes - 12288/41640
Nc: 00003000 done 29% (12288 out of 41640)
Ps: ( 31) at 00003000: 1024 bytes - 13312/41640
Nc: 00003400 done 31% (13312 out of 41640)
Ps: ( 34) at 00003400: 1024 bytes - 14336/41640
Nc: 00003800 done 34% (14336 out of 41640)
Ps: ( 36) at 00003800: 1024 bytes - 15360/41640
Nc: 00003C00 done 36% (15360 out of 41640)
Ps: ( 39) at 00003C00: 1024 bytes - 16384/41640
Nc: 00004000 done 39% (16384 out of 41640)
Ps: ( 41) at 00004000: 1024 bytes - 17408/41640
Nc: 00004400 done 41% (17408 out of 41640)
Ps: ( 44) at 00004400: 1024 bytes - 18432/41640
Nc: 00004800 done 44% (18432 out of 41640)
Ps: ( 46) at 00004800: 1024 bytes - 19456/41640
Nc: 00004C00 done 46% (19456 out of 41640)
Ps: ( 49) at 00004C00: 1024 bytes - 20480/41640
Nc: 00005000 done 49% (20480 out of 41640)
Ps: ( 51) at 00005000: 1024 bytes - 21504/41640
Nc: 00005400 done 51% (21504 out of 41640)
Ps: ( 54) at 00005400: 1024 bytes - 22528/41640
Nc: 00005800 done 54% (22528 out of 41640)
Ps: ( 56) at 00005800: 1024 bytes - 23552/41640
Nc: 00005C00 done 56% (23552 out of 41640)
Ps: ( 59) at 00005C00: 1024 bytes - 24576/41640
Nc: 00006000 done 59% (24576 out of 41640)
Ps: ( 61) at 00006000: 1024 bytes - 25600/41640
Nc: 00006400 done 61% (25600 out of 41640)
Ps: ( 63) at 00006400: 1024 bytes - 26624/41640
Nc: 00006800 done 63% (26624 out of 41640)
Ps: ( 66) at 00006800: 1024 bytes - 27648/41640
Nc: 00006C00 done 66% (27648 out of 41640)
Ps: ( 68) at 00006C00: 1024 bytes - 28672/41640
Nc: 00007000 done 68% (28672 out of 41640)
Ps: ( 71) at 00007000: 1024 bytes - 29696/41640
Nc: 00007400 done 71% (29696 out of 41640)
Ps: ( 73) at 00007400: 1024 bytes - 30720/41640
Nc: 00007800 done 73% (30720 out of 41640)
Ps: ( 76) at 00007800: 1024 bytes - 31744/41640
Nc: 00007C00 done 76% (31744 out of 41640)
Ps: ( 78) at 00007C00: 1024 bytes - 32768/41640
Nc: 00008000 done 78% (32768 out of 41640)
Ps: ( 98) at 00008000: 8192 bytes - 40960/41640
Ps: (100) at 0000A000: 1024 bytes - 41984/41640
Nc: 0000A400 done 100% (41984 out of 41640)
Nc: Sectors written: 33, unchanged: 8, total: 41
Nc: Closing flash driver FTFA_1K.cfx
Pb: (100) Finished writing Flash successfully.
Nt: Loaded 0xA2A8 bytes in 2750ms (about 15kB/s)
Nt: Reset target (system)
Nc: Starting execution using system reset
Executing: /home/jamie/Mbed/mbed-os/venv/bin/mbedhtrun --skip-flashing -p /dev/ttyKL25Z --skip-reset -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m KL25Z --baud-rate=115200
[+344ms][HTST][INF] host test executor ver. 0.0.16
[+344ms][HTST][INF] copy image onto target... SKIPPED!
[+345ms][HTST][INF] starting host test process...
[+348ms][CONN][INF] starting connection process...
[+348ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+348ms][CONN][INF] initializing serial port listener...
[+348ms][SERI][INF] using specified port '/dev/ttyKL25Z'
[+348ms][HTST][INF] setting timeout to: 60 sec
[+348ms][SERI][INF] serial(port=/dev/ttyKL25Z, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+349ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+349ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+349ms][CONN][INF] sending preamble 'e6133b0a-ffe7-4e63-b1f1-2df933a9b296'
[+349ms][SERI][TXD] {{__sync;e6133b0a-ffe7-4e63-b1f1-2df933a9b296}}
[+370ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+370ms][CONN][INF] found KV pair in stream: {{__sync;e6133b0a-ffe7-4e63-b1f1-2df933a9b296}}, queued...
[+370ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+370ms][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[+370ms][CONN][INF] found SYNC in stream: {{__sync;e6133b0a-ffe7-4e63-b1f1-2df933a9b296}} it is #0 sent, queued...
[+370ms][HTST][INF] sync KV found, uuid=e6133b0a-ffe7-4e63-b1f1-2df933a9b296, timestamp=1756137397.486313
[+370ms][HTST][INF] DUT greentea-client version: 1.3.0
[+370ms][HTST][INF] setting timeout to: 2 sec
[+380ms][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[+380ms][CONN][RXD] MBED: before re-routing stdout to /null
[+380ms][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[+380ms][HTST][INF] host test class: ''
[+380ms][HTST][INF] host test setup() call...
[+380ms][HTST][INF] CALLBACKs updated
[+380ms][HTST][INF] host test detected: dev_null_auto
[+381ms][HTST][INF] _callback_to_stdout !
[+2383ms][HTST][INF] test suite run finished after 2.01 sec...
[+2390ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+2426ms][HTST][INF] CONN exited with code: 0
[+2426ms][HTST][INF] No events in queue
[+2426ms][HTST][INF] stopped consuming events
[+2426ms][HTST][INF] host test result(): True
[+2426ms][HTST][WRN] missing __exit event from DUT
[+2426ms][HTST][WRN] missing __exit_event_queue event from host test
[+2426ms][HTST][INF] calling blocking teardown()
[+2426ms][HTST][INF] teardown() finished
[+2426ms][HTST][INF] {{result;success}}