Test Case Output

[1/1] Flashing test-mbed-drivers-dev-null with pyOCD...
0000368 I Target type is mimxrt1060 [board]
0000399 I Performing connect pre-reset [coresight_target]
0000676 I DAP is not accessible after reset; attempting reconnect [dap]
0000936 I DP IDR = 0x0bd11477 (v1 MINDP rev0) [dap]
0000956 I AHB-AP#0 IDR = 0x04770041 (AHB-AP var4 rev0) [discovery]
0000964 I AHB-AP#0 Class 0x1 ROM table #0 @ 0xe00fd000 (designer=00e:NXP part=88c) [rom_table]
0000968 I [0] [rom_table]
0000968 I   AHB-AP#0 Class 0x1 ROM table #1 @ 0xe00fe000 (designer=43b:Arm part=4c8) [rom_table]
0000973 I   [0] [rom_table]
0000973 I     AHB-AP#0 Class 0x1 ROM table #2 @ 0xe00ff000 (designer=43b:Arm part=4c7) [rom_table]
0000978 I     [0] [rom_table]
0000981 I     [1] [rom_table]
0000984 I     [2] [rom_table]
0000987 I     [3] [rom_table]
0000993 I   [1] [rom_table]
0000999 I   [2] [rom_table]
0001005 I [1] [rom_table]
0001008 I [2] [rom_table]
0001012 I IMXRT Boot Mode: Internal Boot [target_imxrt]
0001022 I CPU core #0: Cortex-M7 r1p1, v7.0-M architecture [cortex_m]
0001022 I   Extensions: [DSP, FPU, FPU_DP, FPU_V5, MPU] [cortex_m]
0001022 I   FPU present: FPv5-D16-M [cortex_m]
0001031 I 4 hardware watchpoints [dwt]
0001035 I 8 hardware breakpoints, 1 literal comparators [fpb]
0001050 I Loading /home/jamie/Mbed/mbed-os/build/MIMXRT1060_EVK-Develop/drivers/tests/TESTS/mbed_drivers/dev_null/test-mbed-drivers-dev-null.bin at 0x60000000 [load_cmd]
0001079 I IMXRT Boot Mode: Internal Boot [target_imxrt]
0001081 I IMXRT Boot Device: 0 [target_imxrt]
[---|---|---|---|---|---|---|---|---|----]
[========================================]
0013139 I IMXRT Boot Mode: Internal Boot [target_imxrt]
0013142 I IMXRT Boot Device: 0 [target_imxrt]
0013269 I Erased 131072 bytes (2 sectors), programmed 67328 bytes (263 pages), skipped 0 bytes (0 pages) at 5.38 kB/s [loader]
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyMIMXRT1060_EVK --skip-reset -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m MIMXRT1060_EVK --baud-rate=115200
[+334ms][HTST][INF] host test executor ver. 0.0.16
[+334ms][HTST][INF] copy image onto target... SKIPPED!
[+336ms][HTST][INF] starting host test process...
[+338ms][CONN][INF] starting connection process...
[+338ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+338ms][CONN][INF] initializing serial port listener... 
[+338ms][SERI][INF] using specified port '/dev/ttyMIMXRT1060_EVK'
[+339ms][SERI][INF] serial(port=/dev/ttyMIMXRT1060_EVK, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+339ms][HTST][INF] setting timeout to: 60 sec
[+339ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+339ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+339ms][CONN][INF] sending preamble '6ae8f8f5-f538-40da-bab5-03a13645a57e'
[+340ms][SERI][TXD] {{__sync;6ae8f8f5-f538-40da-bab5-03a13645a57e}}
[+360ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+360ms][CONN][INF] found SYNC in stream: {{__sync;6ae8f8f5-f538-40da-bab5-03a13645a57e}} it is #0 sent, queued...
[+360ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+360ms][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[+360ms][HTST][INF] sync KV found, uuid=6ae8f8f5-f538-40da-bab5-03a13645a57e, timestamp=1736711060.868569
[+360ms][HTST][INF] DUT greentea-client version: 1.3.0
[+360ms][HTST][INF] setting timeout to: 2 sec
[+370ms][CONN][RXD] MBED: before re-routing stdout to /null
[+370ms][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[+370ms][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[+370ms][HTST][INF] host test class: ''
[+371ms][HTST][INF] host test setup() call...
[+371ms][HTST][INF] CALLBACKs updated
[+371ms][HTST][INF] host test detected: dev_null_auto
[+371ms][HTST][INF] _callback_to_stdout !
[+2374ms][HTST][INF] test suite run finished after 2.01 sec...
[+2381ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+2421ms][HTST][INF] CONN exited with code: 0
[+2421ms][HTST][INF] No events in queue
[+2421ms][HTST][INF] stopped consuming events
[+2421ms][HTST][INF] host test result(): True
[+2421ms][HTST][WRN] missing __exit event from DUT
[+2422ms][HTST][WRN] missing __exit_event_queue event from host test
[+2422ms][HTST][INF] calling blocking teardown()
[+2422ms][HTST][INF] teardown() finished
[+2422ms][HTST][INF] {{result;success}}