Test Case Output

[1/1] Flashing test-mbed-platform-system-reset with OpenOCD...
Open On-Chip Debugger 0.12.0+dev-01828-g5233312ea (2025-01-05-08:54)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter driver' not 'interface'
DEPRECATED! use 'hla layout', not 'hla_layout'
DEPRECATED! use 'hla device_desc', not 'hla_device_desc'
DEPRECATED! use 'hla vid_pid', not 'hla_vid_pid'
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
DEPRECATED! use 'adapter serial' not 'hla_serial'
DEPRECATED! use 'gdb port', not 'gdb_port'
Info : clock speed 2000 kHz
Info : STLINK V2J39M27 (API v2) VID:PID 0483:374B
Info : Target voltage: 3.244094
Info : [stm32f4x.cpu] Cortex-M4 r0p1 processor detected
Info : [stm32f4x.cpu] target has 6 breakpoints, 4 watchpoints
Info : [stm32f4x.cpu] Examination succeed
Info : [stm32f4x.cpu] gdb port disabled
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
[stm32f4x.cpu] halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x08000418 msp: 0x20030000
Info : Unable to match requested speed 8000 kHz, using 4000 kHz
Info : Unable to match requested speed 8000 kHz, using 4000 kHz
** Programming Started **
Info : device id = 0x20016419
Info : flash size = 2048 KiB
Info : Dual Bank 2048 kiB STM32F42x/43x/469/479 found
** Programming Finished **
** Resetting Target **
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
shutdown command invoked
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyNUCLEO_F429ZI --skip-reset -e /home/jamie/Mbed/mbed-os/platform/tests/TESTS/host_tests -m NUCLEO_F429ZI --baud-rate=115200
[+334ms][HTST][INF] host test executor ver. 0.0.16
[+334ms][HTST][INF] copy image onto target... SKIPPED!
[+336ms][HTST][INF] starting host test process...
[+338ms][CONN][INF] starting connection process...
[+338ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+339ms][CONN][INF] initializing serial port listener... 
[+339ms][SERI][INF] using specified port '/dev/ttyNUCLEO_F429ZI'
[+339ms][SERI][INF] serial(port=/dev/ttyNUCLEO_F429ZI, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+339ms][HTST][INF] setting timeout to: 60 sec
[+342ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+342ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+342ms][CONN][INF] sending preamble '337dbba5-c830-4fd8-92a8-5ea8480719a4'
[+346ms][SERI][TXD] {{__sync;337dbba5-c830-4fd8-92a8-5ea8480719a4}}
[+356ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+356ms][CONN][INF] found SYNC in stream: {{__sync;337dbba5-c830-4fd8-92a8-5ea8480719a4}} it is #0 sent, queued...
[+356ms][HTST][INF] sync KV found, uuid=337dbba5-c830-4fd8-92a8-5ea8480719a4, timestamp=1736405372.531665
[+366ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+366ms][CONN][INF] found KV pair in stream: {{__timeout;30}}, queued...
[+366ms][CONN][INF] found KV pair in stream: {{__host_test_name;system_reset}}, queued...
[+366ms][CONN][INF] found KV pair in stream: {{ready;0}}, queued...
[+366ms][HTST][INF] DUT greentea-client version: 1.3.0
[+366ms][HTST][INF] setting timeout to: 30 sec
[+366ms][HTST][INF] host test class: ''
[+366ms][HTST][INF] host test setup() call...
[+366ms][HTST][INF] CALLBACKs updated
[+366ms][HTST][INF] host test detected: system_reset
[+377ms][SERI][TXD] {{reset;0}}
[+1372ms][SERI][TXD] {{__sync;0}}
[+1383ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+1383ms][CONN][INF] found KV pair in stream: {{__sync;0}}, queued...
[+1383ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+1383ms][CONN][INF] found KV pair in stream: {{__timeout;30}}, queued...
[+1384ms][HTST][ERR] orphan event in main phase: {{__sync;0}}, timestamp=1736405373.558281
[+1384ms][HTST][ERR] orphan event in main phase: {{__version;1.3.0}}, timestamp=1736405373.558295
[+1384ms][HTST][ERR] orphan event in main phase: {{__timeout;30}}, timestamp=1736405373.558302
[+1393ms][CONN][INF] found KV pair in stream: {{__host_test_name;system_reset}}, queued...
[+1394ms][CONN][INF] found KV pair in stream: {{ready;0}}, queued...
[+1394ms][HTST][ERR] orphan event in main phase: {{__host_test_name;system_reset}}, timestamp=1736405373.569172
[+1396ms][HTST][INF] __notify_complete(True)
[+1396ms][HTST][INF] __exit_event_queue received
[+1396ms][HTST][INF] test suite run finished after 1.03 sec...
[+1404ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+1445ms][HTST][INF] CONN exited with code: 0
[+1445ms][HTST][INF] No events in queue
[+1445ms][HTST][INF] stopped consuming events
[+1445ms][HTST][INF] host test result() call skipped, received: True
[+1445ms][HTST][WRN] missing __exit event from DUT
[+1445ms][HTST][INF] calling blocking teardown()
[+1445ms][HTST][INF] teardown() finished
[+1446ms][HTST][INF] {{result;success}}