Back to test-mbed-hal-rtc-reset Results ^
Target: NUCLEO_H563ZI
Test: test-mbed-hal-rtc-reset
Test Case: test-mbed-hal-rtc-reset
[1/1] Flashing test-mbed-hal-rtc-reset with STM32CubeProg...
-------------------------------------------------------------------
STM32CubeProgrammer v2.18.0
-------------------------------------------------------------------
libusb: warning [libusb_exit] device 8.1 still referenced
libusb: warning [libusb_exit] device 7.9 still referenced
libusb: warning [libusb_exit] device 7.8 still referenced
libusb: warning [libusb_exit] device 7.7 still referenced
libusb: warning [libusb_exit] device 7.6 still referenced
libusb: warning [libusb_exit] device 7.1 still referenced
libusb: warning [libusb_exit] device 6.1 still referenced
libusb: warning [libusb_exit] device 5.1 still referenced
libusb: warning [libusb_exit] device 2.1 still referenced
libusb: warning [libusb_exit] device 1.8 still referenced
libusb: warning [libusb_exit] device 1.6 still referenced
libusb: warning [libusb_exit] device 1.10 still referenced
libusb: warning [libusb_exit] device 1.4 still referenced
libusb: warning [libusb_exit] device 1.3 still referenced
libusb: warning [libusb_exit] device 1.2 still referenced
libusb: warning [libusb_exit] device 1.11 still referenced
libusb: warning [libusb_exit] device 1.9 still referenced
libusb: warning [libusb_exit] device 1.7 still referenced
libusb: warning [libusb_exit] device 1.5 still referenced
libusb: warning [libusb_exit] device 1.1 still referenced
libusb: warning [libusb_exit] device 4.2 still referenced
libusb: warning [libusb_exit] device 4.1 still referenced
libusb: warning [libusb_exit] device 3.3 still referenced
libusb: warning [libusb_exit] device 3.2 still referenced
libusb: warning [libusb_exit] device 3.1 still referenced
ST-LINK SN : 003300413133511437363734
ST-LINK FW : V3J10M3
Board : NUCLEO-H563ZI
Voltage : 3.27V
Warning: Connection to AP 0 requested and failed, Connection established with AP 1
SWD freq : 8000 KHz
Connect mode: Under Reset
Reset mode : Hardware reset
Device ID : 0x484
Revision ID : Rev X
Device name : STM32H56x/573
Flash size : 2 MBytes
Device type : MCU
Device CPU : Cortex-M33
BL Version : 0xE4
SFSP Version: v2.5.0
Debug in Low Power mode enabled
Opening and parsing file: test-mbed-hal-rtc-reset.bin
Memory Programming ...
File : test-mbed-hal-rtc-reset.bin
Size : 112.80 KB
Address : 0x08000000
Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 14]
Download in Progress:
[========================== ] 52% [==================================================] 100%
File download complete
Time elapsed during download operation: 00:00:00.413
MCU Reset
Software reset is performed
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyNUCLEO_H563ZI --skip-reset -e /home/jamie/Mbed/mbed-os/hal/tests/TESTS/host_tests -m NUCLEO_H563ZI --baud-rate=115200
[+342ms][HTST][INF] host test executor ver. 0.0.16
[+342ms][HTST][INF] copy image onto target... SKIPPED!
[+344ms][HTST][INF] starting host test process...
[+346ms][CONN][INF] starting connection process...
[+346ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+346ms][CONN][INF] initializing serial port listener...
[+347ms][SERI][INF] using specified port '/dev/ttyNUCLEO_H563ZI'
[+347ms][HTST][INF] setting timeout to: 60 sec
[+347ms][SERI][INF] serial(port=/dev/ttyNUCLEO_H563ZI, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+350ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+350ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+350ms][CONN][INF] sending preamble '98e5c6a2-f5ce-45c5-abb4-a8861c5aa7a5'
[+353ms][SERI][TXD] {{__sync;98e5c6a2-f5ce-45c5-abb4-a8861c5aa7a5}}
[+363ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+374ms][CONN][INF] found SYNC in stream: {{__sync;98e5c6a2-f5ce-45c5-abb4-a8861c5aa7a5}} it is #0 sent, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__timeout;100}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__host_test_name;rtc_reset}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{start;1}}, queued...
[+375ms][HTST][INF] sync KV found, uuid=98e5c6a2-f5ce-45c5-abb4-a8861c5aa7a5, timestamp=1736405142.391344
[+375ms][HTST][INF] DUT greentea-client version: 1.3.0
[+376ms][HTST][INF] setting timeout to: 100 sec
[+376ms][HTST][INF] host test class: ''
[+376ms][HTST][INF] host test setup() call...
[+376ms][HTST][INF] CALLBACKs updated
[+376ms][HTST][INF] host test detected: rtc_reset
[+385ms][SERI][TXD] {{init;0}}
[+396ms][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[+407ms][SERI][TXD] {{write;1537789823}}
[+417ms][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[+428ms][SERI][TXD] {{read;0}}
[+438ms][CONN][INF] found KV pair in stream: {{read;1537789823}}, queued...
[+449ms][SERI][TXD] {{free;0}}
[+459ms][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[+470ms][SERI][TXD] {{reset;0}}
[+5462ms][SERI][TXD] {{__sync;00000000-0000-000000000-000000000000}}
[+5473ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+5483ms][CONN][INF] found KV pair in stream: {{__sync;00000000-0000-000000000-000000000000}}, queued...
[+5483ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+5484ms][CONN][INF] found KV pair in stream: {{__timeout;100}}, queued...
[+5484ms][CONN][INF] found KV pair in stream: {{__host_test_name;rtc_reset}}, queued...
[+5484ms][CONN][INF] found KV pair in stream: {{start;1}}, queued...
[+5484ms][HTST][ERR] orphan event in main phase: {{__sync;00000000-0000-000000000-000000000000}}, timestamp=1736405147.500835
[+5485ms][HTST][ERR] orphan event in main phase: {{__version;1.3.0}}, timestamp=1736405147.500850
[+5485ms][HTST][ERR] orphan event in main phase: {{__timeout;100}}, timestamp=1736405147.500858
[+5485ms][HTST][ERR] orphan event in main phase: {{__host_test_name;rtc_reset}}, timestamp=1736405147.500864
[+5495ms][SERI][TXD] {{init;0}}
[+5505ms][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[+5516ms][SERI][TXD] {{read;0}}
[+5527ms][CONN][INF] found KV pair in stream: {{read;1537789828}}, queued...
[+5537ms][SERI][TXD] {{exit;pass}}
[+5548ms][CONN][INF] found KV pair in stream: {{end;success}}, queued...
[+5548ms][CONN][INF] found KV pair in stream: {{__exit;0}}, queued...
[+5549ms][HTST][INF] __exit(0)
[+5550ms][HTST][INF] __notify_complete(True)
[+5550ms][HTST][INF] __exit_event_queue received
[+5550ms][HTST][INF] test suite run finished after 5.17 sec...
[+5559ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+5573ms][HTST][INF] CONN exited with code: 0
[+5573ms][HTST][INF] Some events in queue
[+5573ms][HTST][INF] stopped consuming events
[+5573ms][HTST][INF] host test result() call skipped, received: True
[+5573ms][HTST][INF] calling blocking teardown()
[+5573ms][HTST][INF] teardown() finished
[+5574ms][HTST][INF] {{result;success}}