Back to test-mbed-platform-system-reset Results ^
Target: NUCLEO_H563ZI
Test: test-mbed-platform-system-reset
Test Case: test-mbed-platform-system-reset
[1/1] Flashing test-mbed-platform-system-reset with STM32CubeProg...
-------------------------------------------------------------------
STM32CubeProgrammer v2.18.0
-------------------------------------------------------------------
libusb: warning [libusb_exit] device 8.1 still referenced
libusb: warning [libusb_exit] device 7.9 still referenced
libusb: warning [libusb_exit] device 7.8 still referenced
libusb: warning [libusb_exit] device 7.7 still referenced
libusb: warning [libusb_exit] device 7.6 still referenced
libusb: warning [libusb_exit] device 7.1 still referenced
libusb: warning [libusb_exit] device 6.1 still referenced
libusb: warning [libusb_exit] device 5.1 still referenced
libusb: warning [libusb_exit] device 2.1 still referenced
libusb: warning [libusb_exit] device 1.8 still referenced
libusb: warning [libusb_exit] device 1.6 still referenced
libusb: warning [libusb_exit] device 1.10 still referenced
libusb: warning [libusb_exit] device 1.4 still referenced
libusb: warning [libusb_exit] device 1.3 still referenced
libusb: warning [libusb_exit] device 1.2 still referenced
libusb: warning [libusb_exit] device 1.11 still referenced
libusb: warning [libusb_exit] device 1.9 still referenced
libusb: warning [libusb_exit] device 1.7 still referenced
libusb: warning [libusb_exit] device 1.5 still referenced
libusb: warning [libusb_exit] device 1.1 still referenced
libusb: warning [libusb_exit] device 4.2 still referenced
libusb: warning [libusb_exit] device 4.1 still referenced
libusb: warning [libusb_exit] device 3.3 still referenced
libusb: warning [libusb_exit] device 3.2 still referenced
libusb: warning [libusb_exit] device 3.1 still referenced
ST-LINK SN : 003300413133511437363734
ST-LINK FW : V3J10M3
Board : NUCLEO-H563ZI
Voltage : 3.28V
Warning: Connection to AP 0 requested and failed, Connection established with AP 1
SWD freq : 8000 KHz
Connect mode: Under Reset
Reset mode : Hardware reset
Device ID : 0x484
Revision ID : Rev X
Device name : STM32H56x/573
Flash size : 2 MBytes
Device type : MCU
Device CPU : Cortex-M33
BL Version : 0xE4
SFSP Version: v2.5.0
Debug in Low Power mode enabled
Opening and parsing file: test-mbed-platform-system-reset.bin
Memory Programming ...
File : test-mbed-platform-system-reset.bin
Size : 67.73 KB
Address : 0x08000000
Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 8]
Download in Progress:
[=========================================== ] 87% [==================================================] 100%
File download complete
Time elapsed during download operation: 00:00:00.270
MCU Reset
Software reset is performed
Executing: /home/jamie/Mbed/mbed-os/venv/bin/python3 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyNUCLEO_H563ZI --skip-reset -e /home/jamie/Mbed/mbed-os/platform/tests/TESTS/host_tests -m NUCLEO_H563ZI --baud-rate=115200
[+341ms][HTST][INF] host test executor ver. 0.0.16
[+341ms][HTST][INF] copy image onto target... SKIPPED!
[+343ms][HTST][INF] starting host test process...
[+345ms][CONN][INF] starting connection process...
[+346ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+346ms][CONN][INF] initializing serial port listener...
[+346ms][SERI][INF] using specified port '/dev/ttyNUCLEO_H563ZI'
[+346ms][SERI][INF] serial(port=/dev/ttyNUCLEO_H563ZI, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+346ms][HTST][INF] setting timeout to: 60 sec
[+350ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+350ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+350ms][CONN][INF] sending preamble '954431f3-0c5f-46ea-ac77-abd488d2d3ff'
[+353ms][SERI][TXD] {{__sync;954431f3-0c5f-46ea-ac77-abd488d2d3ff}}
[+363ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+373ms][CONN][INF] found SYNC in stream: {{__sync;954431f3-0c5f-46ea-ac77-abd488d2d3ff}} it is #0 sent, queued...
[+373ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__timeout;30}}, queued...
[+374ms][CONN][INF] found KV pair in stream: {{__host_test_name;system_reset}}, queued...
[+374ms][HTST][INF] sync KV found, uuid=954431f3-0c5f-46ea-ac77-abd488d2d3ff, timestamp=1736405209.849509
[+374ms][CONN][INF] found KV pair in stream: {{ready;0}}, queued...
[+374ms][HTST][INF] DUT greentea-client version: 1.3.0
[+374ms][HTST][INF] setting timeout to: 30 sec
[+374ms][HTST][INF] host test class: ''
[+374ms][HTST][INF] host test setup() call...
[+374ms][HTST][INF] CALLBACKs updated
[+374ms][HTST][INF] host test detected: system_reset
[+384ms][SERI][TXD] {{reset;0}}
[+1381ms][SERI][TXD] {{__sync;0}}
[+1391ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+1392ms][CONN][INF] found KV pair in stream: {{__sync;0}}, queued...
[+1392ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+1392ms][CONN][INF] found KV pair in stream: {{__timeout;30}}, queued...
[+1393ms][HTST][ERR] orphan event in main phase: {{__sync;0}}, timestamp=1736405210.867407
[+1393ms][HTST][ERR] orphan event in main phase: {{__version;1.3.0}}, timestamp=1736405210.867421
[+1393ms][HTST][ERR] orphan event in main phase: {{__timeout;30}}, timestamp=1736405210.867428
[+1402ms][CONN][INF] found KV pair in stream: {{__host_test_name;system_reset}}, queued...
[+1402ms][CONN][INF] found KV pair in stream: {{ready;0}}, queued...
[+1403ms][HTST][ERR] orphan event in main phase: {{__host_test_name;system_reset}}, timestamp=1736405210.878294
[+1404ms][HTST][INF] __notify_complete(True)
[+1405ms][HTST][INF] __exit_event_queue received
[+1405ms][HTST][INF] test suite run finished after 1.03 sec...
[+1413ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+1427ms][HTST][INF] CONN exited with code: 0
[+1427ms][HTST][INF] No events in queue
[+1428ms][HTST][INF] stopped consuming events
[+1428ms][HTST][INF] host test result() call skipped, received: True
[+1428ms][HTST][WRN] missing __exit event from DUT
[+1428ms][HTST][INF] calling blocking teardown()
[+1428ms][HTST][INF] teardown() finished
[+1428ms][HTST][INF] {{result;success}}