Test Case Output

[1/1] Flashing test-mbed-drivers-dev-null with OpenOCD...
Open On-Chip Debugger 0.12.0+dev-00499-g151b74371 (2024-01-22-10:06)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Warn : The selected adapter does not support debugging this device in secure mode
DEPRECATED! use 'adapter serial' not 'hla_serial'
Info : clock speed 500 kHz
Info : STLINK V3J12M3 (API v3) VID:PID 0483:374E
Info : Target voltage: 3.284881
Info : [stm32u5x.cpu] Cortex-M33 r0p4 processor detected
Info : [stm32u5x.cpu] target has 8 breakpoints, 4 watchpoints
Info : [stm32u5x.cpu] Examination succeed
Info : gdb port disabled
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
CPU in Non-Secure state
[stm32u5x.cpu] halted due to debug-request, current mode: Thread 
xPSR: 0xf9000000 pc: 0x08000344 msp: 0x200c0000
Info : Unable to match requested speed 4000 kHz, using 3300 kHz
Info : Unable to match requested speed 4000 kHz, using 3300 kHz
** Programming Started **
Info : device idcode = 0x20016482 (STM32U57/U58xx - Rev X : 0x2001)
Info : TZEN = 0 : TrustZone disabled by option bytes
Info : RDP level 0 (0xAA)
Info : flash size = 2048 KiB
Info : flash mode : dual-bank
Info : Padding image section 1 at 0x0800e7fc with 4 bytes (bank write end alignment)
Warn : Adding extra erase range, 0x0800e800 .. 0x0800ffff
** Programming Finished **
** Resetting Target **
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
shutdown command invoked
Executing: /usr/bin/python3.10 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyNUCLEO_U575ZI_Q --skip-reset -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m NUCLEO_U575ZI_Q --baud-rate=115200
[1706677319.34][HTST][INF] host test executor ver. 0.0.16
[1706677319.34][HTST][INF] copy image onto target... SKIPPED!
[1706677319.35][HTST][INF] starting host test process...
[1706677319.36][CONN][INF] starting connection process...
[1706677319.36][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1706677319.36][CONN][INF] initializing serial port listener... 
[1706677319.36][SERI][INF] using specified port '/dev/ttyNUCLEO_U575ZI_Q'
[1706677319.36][SERI][INF] serial(port=/dev/ttyNUCLEO_U575ZI_Q, baudrate=115200, read_timeout=0.01, write_timeout=5)
[1706677319.36][HTST][INF] setting timeout to: 60 sec
[1706677319.37][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1706677319.37][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[1706677319.37][CONN][INF] sending preamble '76182ac4-fad4-491a-a829-22cf115dd806'
[1706677319.37][SERI][TXD] {{__sync;76182ac4-fad4-491a-a829-22cf115dd806}}
[1706677319.38][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[1706677319.39][CONN][RXD] MBED: before re-routing stdout to /null
[1706677319.39][CONN][INF] found SYNC in stream: {{__sync;76182ac4-fad4-491a-a829-22cf115dd806}} it is #0 sent, queued...
[1706677319.39][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[1706677319.39][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[1706677319.39][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[1706677319.39][HTST][INF] sync KV found, uuid=76182ac4-fad4-491a-a829-22cf115dd806, timestamp=1706677319.391815
[1706677319.39][HTST][INF] DUT greentea-client version: 1.3.0
[1706677319.39][HTST][INF] setting timeout to: 2 sec
[1706677319.39][HTST][INF] host test class: ''
[1706677319.40][HTST][INF] host test setup() call...
[1706677319.40][HTST][INF] CALLBACKs updated
[1706677319.40][HTST][INF] host test detected: dev_null_auto
[1706677319.40][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[1706677319.41][HTST][INF] _callback_to_stdout !
[1706677321.41][HTST][INF] test suite run finished after 2.01 sec...
[1706677321.42][CONN][INF] received special event '__host_test_finished' value='True', finishing
[1706677321.42][HTST][INF] CONN exited with code: 0
[1706677321.43][HTST][INF] No events in queue
[1706677321.43][HTST][INF] stopped consuming events
[1706677321.43][HTST][INF] host test result(): True
[1706677321.43][HTST][WRN] missing __exit event from DUT
[1706677321.43][HTST][WRN] missing __exit_event_queue event from host test
[1706677321.43][HTST][INF] calling blocking teardown()
[1706677321.43][HTST][INF] teardown() finished
[1706677321.43][HTST][INF] {{result;success}}