Test Case Output

[1/1] Flashing test-mbed-hal-rtc-reset with OpenOCD...
Open On-Chip Debugger 0.12.0+dev-00499-g151b74371 (2024-01-22-10:06)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Warn : The selected adapter does not support debugging this device in secure mode
DEPRECATED! use 'adapter serial' not 'hla_serial'
Info : clock speed 500 kHz
Info : STLINK V3J12M3 (API v3) VID:PID 0483:374E
Info : Target voltage: 3.286472
Info : [stm32u5x.cpu] Cortex-M33 r0p4 processor detected
Info : [stm32u5x.cpu] target has 8 breakpoints, 4 watchpoints
Info : [stm32u5x.cpu] Examination succeed
Info : gdb port disabled
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
CPU in Non-Secure state
[stm32u5x.cpu] halted due to debug-request, current mode: Thread 
xPSR: 0xf9000000 pc: 0x08000344 msp: 0x200c0000
Info : Unable to match requested speed 4000 kHz, using 3300 kHz
Info : Unable to match requested speed 4000 kHz, using 3300 kHz
** Programming Started **
Info : device idcode = 0x20016482 (STM32U57/U58xx - Rev X : 0x2001)
Info : TZEN = 0 : TrustZone disabled by option bytes
Info : RDP level 0 (0xAA)
Info : flash size = 2048 KiB
Info : flash mode : dual-bank
Info : Padding image section 1 at 0x0801a994 with 12 bytes (bank write end alignment)
Warn : Adding extra erase range, 0x0801a9a0 .. 0x0801bfff
** Programming Finished **
** Resetting Target **
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
shutdown command invoked
Executing: /usr/bin/python3.10 -m mbed_host_tests.mbedhtrun --skip-flashing -p /dev/ttyNUCLEO_U575ZI_Q --skip-reset -e /home/jamie/Mbed/mbed-os/hal/tests/TESTS/host_tests -m NUCLEO_U575ZI_Q --baud-rate=115200
[1706677517.05][HTST][INF] host test executor ver. 0.0.16
[1706677517.05][HTST][INF] copy image onto target... SKIPPED!
[1706677517.06][HTST][INF] starting host test process...
[1706677517.07][CONN][INF] starting connection process...
[1706677517.07][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1706677517.07][CONN][INF] initializing serial port listener... 
[1706677517.07][SERI][INF] using specified port '/dev/ttyNUCLEO_U575ZI_Q'
[1706677517.07][SERI][INF] serial(port=/dev/ttyNUCLEO_U575ZI_Q, baudrate=115200, read_timeout=0.01, write_timeout=5)
[1706677517.08][HTST][INF] setting timeout to: 60 sec
[1706677517.08][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1706677517.08][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[1706677517.08][CONN][INF] sending preamble '5a683cf8-04dc-4c77-9df0-cf408f83f0cf'
[1706677517.08][SERI][TXD] {{__sync;5a683cf8-04dc-4c77-9df0-cf408f83f0cf}}
[1706677517.09][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[1706677517.10][CONN][INF] found SYNC in stream: {{__sync;5a683cf8-04dc-4c77-9df0-cf408f83f0cf}} it is #0 sent, queued...
[1706677517.10][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[1706677517.10][HTST][INF] sync KV found, uuid=5a683cf8-04dc-4c77-9df0-cf408f83f0cf, timestamp=1706677517.103958
[1706677517.11][CONN][INF] found KV pair in stream: {{__timeout;100}}, queued...
[1706677517.11][HTST][INF] DUT greentea-client version: 1.3.0
[1706677517.11][CONN][INF] found KV pair in stream: {{__host_test_name;rtc_reset}}, queued...
[1706677517.11][HTST][INF] setting timeout to: 100 sec
[1706677517.11][CONN][INF] found KV pair in stream: {{start;1}}, queued...
[1706677517.11][HTST][INF] host test class: ''
[1706677517.11][HTST][INF] host test setup() call...
[1706677517.11][HTST][INF] CALLBACKs updated
[1706677517.11][HTST][INF] host test detected: rtc_reset
[1706677517.12][SERI][TXD] {{init;0}}
[1706677517.13][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[1706677517.14][SERI][TXD] {{write;1537789823}}
[1706677517.15][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[1706677517.16][SERI][TXD] {{read;0}}
[1706677517.17][CONN][INF] found KV pair in stream: {{read;1537789823}}, queued...
[1706677517.18][SERI][TXD] {{free;0}}
[1706677517.19][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[1706677517.20][SERI][TXD] {{reset;0}}
[1706677522.21][SERI][TXD] {{__sync;00000000-0000-000000000-000000000000}}
[1706677522.22][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[1706677522.23][CONN][INF] found KV pair in stream: {{__sync;00000000-0000-000000000-000000000000}}, queued...
[1706677522.23][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[1706677522.23][HTST][ERR] orphan event in main phase: {{__sync;00000000-0000-000000000-000000000000}}, timestamp=1706677522.227904
[1706677522.23][CONN][INF] found KV pair in stream: {{__timeout;100}}, queued...
[1706677522.23][HTST][ERR] orphan event in main phase: {{__version;1.3.0}}, timestamp=1706677522.227927
[1706677522.23][CONN][INF] found KV pair in stream: {{__host_test_name;rtc_reset}}, queued...
[1706677522.23][HTST][ERR] orphan event in main phase: {{__timeout;100}}, timestamp=1706677522.227938
[1706677522.23][CONN][INF] found KV pair in stream: {{start;1}}, queued...
[1706677522.23][HTST][ERR] orphan event in main phase: {{__host_test_name;rtc_reset}}, timestamp=1706677522.227948
[1706677522.24][SERI][TXD] {{init;0}}
[1706677522.25][CONN][INF] found KV pair in stream: {{ack;0}}, queued...
[1706677522.26][SERI][TXD] {{read;0}}
[1706677522.27][CONN][INF] found KV pair in stream: {{read;1537789828}}, queued...
[1706677522.29][SERI][TXD] {{exit;pass}}
[1706677522.30][CONN][INF] found KV pair in stream: {{end;success}}, queued...
[1706677522.30][CONN][INF] found KV pair in stream: {{__exit;0}}, queued...
[1706677522.30][HTST][INF] __exit(0)
[1706677522.30][HTST][INF] __notify_complete(True)
[1706677522.30][HTST][INF] __exit_event_queue received
[1706677522.30][HTST][INF] test suite run finished after 5.19 sec...
[1706677522.31][CONN][INF] received special event '__host_test_finished' value='True', finishing
[1706677522.32][HTST][INF] CONN exited with code: 0
[1706677522.32][HTST][INF] Some events in queue
[1706677522.32][HTST][INF] stopped consuming events
[1706677522.32][HTST][INF] host test result() call skipped, received: True
[1706677522.32][HTST][INF] calling blocking teardown()
[1706677522.32][HTST][INF] teardown() finished
[1706677522.32][HTST][INF] {{result;success}}