Back to test-mbed-usb-device-basic Results ^
Target: RASPBERRY_PI_PICO
Test: test-mbed-usb-device-basic
Test Case: usb control basic test
{{__testcase_start;usb control basic test}}, queued...
[1732403058.42][CONN][INF] found KV pair in stream: {{control_basic_test;0123456789 3368 517}}, queued...
[1732403058.76][CONN][RXD]
[1732403058.76][CONN][RXD]
[1732403058.76][CONN][RXD] ++ MbedOS Error Info ++
[1732403058.76][CONN][RXD] Error Status: 0x80FF0144 Code: 324 Module: 255
[1732403058.76][CONN][RXD] Error Message: Assertion failed: !configured()
[1732403058.77][CONN][RXD] Location: 0x10003275
[1732403058.77][CONN][RXD] File: USBDevice.cpp+1453
[1732403058.77][CONN][RXD] Error Value: 0x0
[1732403058.78][CONN][RXD] Current Thread: main Id: 0x20002C58 Entry: 0x10005781 StackSize: 0x1000 StackMem: 0x20000EB8 SP: 0x20040E24
[1732403058.78][CONN][RXD] For more info, visit: https://mbed.com/s/error?error=0x80FF0144&tgt=RASPBERRY_PI_PICO_SWD
[1732403058.78][CONN][RXD] -- MbedOS Error Info --
[1732403064.00][SERI][TXD] {{fail;0}}
<<< get_set_configuration_test >>>
device deconfigured - OK
configuration 1 set - OK
configuration 2 set - OK
<<< get_set_interface_test >>>
cfg(1) inteface 0.0 set - OK
cfg(1) inteface 0.1 set - OK
cfg(1) inteface 1.0 set - OK
cfg(1) inteface 1.1 set - OK
cfg(2) inteface 0.0 set - OK
cfg(2) inteface 0.1 set - OK
cfg(2) inteface 1.0 set - OK
cfg(2) inteface 1.1 set - OK
<<< get_status_test >>>
cfg(1) interface 0.0 status - OK
cfg(1) intf(0.0) endpoint 129 status - OK
cfg(1) intf(0.0) endpoint 1 status - OK
cfg(1) interface 0.1 status - OK
cfg(1) intf(0.1) endpoint 129 status - OK
cfg(1) intf(0.1) endpoint 1 status - OK
[1732403069.11][HTST][INF] TEST FAILED: [/home/jamie/Mbed/mbed-os/drivers/usb/tests/TESTS/host_tests/pyusb_basic.py]:517, Dev-host transfer error ([Errno None] Other error).
[1732403238.32][HTST][INF] test suite run finished after 180.49 sec...
[1732403238.32][CONN][INF] received special event '__host_test_finished' value='True', finishing
[1732403238.36][HTST][INF] CONN exited with code: 0
[1732403238.36][HTST][INF] No events in queue
[1732403238.36][HTST][INF] stopped consuming events
[1732403238.36][HTST][INF] host test result(): False
[1732403238.36][HTST][WRN] missing __exit event from DUT
[1732403238.36][HTST][WRN] missing __exit_event_queue event from host test
[1732403238.36][HTST][INF] calling blocking teardown()
[1732403238.36][HTST][INF] teardown() finished