Test Case Output

[0/1] Flashing test-mbed-drivers-dev-null with pyOCD...
0000353 I Target type is ama3b1kk_kbr [board]
0000373 I DP IDR = 0x2ba01477 (v1 rev2) [dap]
0000397 I AHB-AP#0 IDR = 0x24770011 (AHB-AP var1 rev2) [discovery]
0000450 I AHB-AP#0 Class 0x1 ROM table #0 @ 0xe00ff000 (designer=43b:Arm part=4c4) [rom_table]
0000451 I [0] [rom_table]
0000452 I [1] [rom_table]
0000453 I [2] [rom_table]
0000453 I [3] [rom_table]
0000454 I [4] [rom_table]
0000456 I CPU core #0: Cortex-M4 r0p1, v7.0-M architecture [cortex_m]
0000456 I   Extensions: [DSP, FPU, FPU_V4, MPU] [cortex_m]
0000456 I   FPU present: FPv4-SP-D16-M [cortex_m]
0000457 I 4 hardware watchpoints [dwt]
0000458 I 6 hardware breakpoints, 4 literal comparators [fpb]
0000460 I Loading /home/jamie/Mbed/mbed-os/test-executor-build/SFE_ARTEMIS/drivers/tests/TESTS/mbed_drivers/dev_null/test-mbed-drivers-dev-null.bin at 0x00010000 [load_cmd]
[---|---|---|---|---|---|---|---|---|----]
[========================================]
0001370 I Erased 49152 bytes (6 sectors), programmed 49152 bytes (6 pages), skipped 0 bytes (0 pages) at 52.82 kB/s [loader]
Executing: /home/jamie/Mbed/mbed-os/venv/bin/mbedhtrun --skip-flashing -p /dev/ttySFE_ARTEMIS --skip-reset --sync-predelay 0.3 -e /home/jamie/Mbed/mbed-os/drivers/tests/TESTS/host_tests -m SFE_ARTEMIS --baud-rate=115200
[+425ms][HTST][INF] host test executor ver. 0.0.16
[+425ms][HTST][INF] copy image onto target... SKIPPED!
[+426ms][HTST][INF] starting host test process...
[+429ms][CONN][INF] starting connection process...
[+429ms][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[+429ms][CONN][INF] initializing serial port listener... 
[+430ms][SERI][INF] using specified port '/dev/ttySFE_ARTEMIS'
[+430ms][HTST][INF] setting timeout to: 60 sec
[+430ms][SERI][INF] serial(port=/dev/ttySFE_ARTEMIS, baudrate=115200, read_timeout=0.01, write_timeout=5)
[+431ms][CONN][INF] Pre-sync delay for 0.30 sec...
[+731ms][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[+731ms][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[+731ms][CONN][INF] sending preamble 'eab1922c-b902-4324-9373-ee0e760661fb'
[+731ms][SERI][TXD] {{__sync;eab1922c-b902-4324-9373-ee0e760661fb}}
[+742ms][CONN][WRN] UnicodeDecodeError encountered! Raw bytes were b'\xfe' and they decoded to ""
[+752ms][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[+752ms][CONN][INF] found KV pair in stream: {{__sync;eab1922c-b902-4324-9373-ee0e760661fb}}, queued...
[+752ms][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[+752ms][CONN][INF] found KV pair in stream: {{__timeout;2}}, queued...
[+752ms][CONN][INF] found SYNC in stream: {{__sync;eab1922c-b902-4324-9373-ee0e760661fb}} it is #0 sent, queued...
[+752ms][HTST][INF] sync KV found, uuid=eab1922c-b902-4324-9373-ee0e760661fb, timestamp=1756100456.797249
[+753ms][HTST][INF] DUT greentea-client version: 1.3.0
[+753ms][HTST][INF] setting timeout to: 2 sec
[+762ms][CONN][INF] found KV pair in stream: {{__host_test_name;dev_null_auto}}, queued...
[+763ms][CONN][RXD] MBED: before re-routing stdout to /null
[+763ms][CONN][INF] found KV pair in stream: {{to_stdout;re-routing stdout to /null}}, queued...
[+763ms][HTST][INF] host test class: ''
[+763ms][HTST][INF] host test setup() call...
[+763ms][HTST][INF] CALLBACKs updated
[+763ms][HTST][INF] host test detected: dev_null_auto
[+763ms][HTST][INF] _callback_to_stdout !
[+2765ms][HTST][INF] test suite run finished after 2.01 sec...
[+2766ms][CONN][INF] received special event '__host_test_finished' value='True', finishing
[+2774ms][HTST][INF] CONN exited with code: 0
[+2774ms][HTST][INF] No events in queue
[+2774ms][HTST][INF] stopped consuming events
[+2774ms][HTST][INF] host test result(): True
[+2774ms][HTST][WRN] missing __exit event from DUT
[+2774ms][HTST][WRN] missing __exit_event_queue event from host test
[+2774ms][HTST][INF] calling blocking teardown()
[+2774ms][HTST][INF] teardown() finished
[+2774ms][HTST][INF] {{result;success}}