USBCDC.h

/*
 * Copyright (c) 2018-2019, Arm Limited and affiliates.
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
#ifndef USBCDC_H
#define USBCDC_H
 
/* These headers are included for child class. */
#include "USBDescriptor.h"
#include "USBDevice_Types.h"
 
#include "USBDevice.h"
#include "OperationList.h"
 
class AsyncOp;
 
/**
 * \defgroup drivers_USBCDC USBCDC class
 * \ingroup drivers-public-api-usb
 * @{
 */
 
#define CDC_MAX_PACKET_SIZE   64
 
class USBCDC: public USBDevice {
public:
 
    /**
    * Basic constructor
    *
    * Construct this object optionally connecting and blocking until it is ready.
    *
    * @note Do not use this constructor in derived classes.
    *
    * @param connect_blocking true to perform a blocking connect, false to start in a disconnected state
    * @param vendor_id Your vendor_id
    * @param product_id Your product_id
    * @param product_release Your product_release
    */
    USBCDC(bool connect_blocking = true, uint16_t vendor_id = 0x1f00, uint16_t product_id = 0x2012, uint16_t product_release = 0x0001);
 
    /**
    * Fully featured constructor
    *
    * Construct this object with the supplied USBPhy and parameters. The user
    * this object is responsible for calling connect() or init().
    *
    * @note Derived classes must use this constructor and call init() or
    * connect() themselves. Derived classes should also call deinit() in
    * their destructor. This ensures that no interrupts can occur when the
    * object is partially constructed or destroyed.
    *
    * @param phy USB phy to use
    * @param vendor_id Your vendor_id
    * @param product_id Your product_id
    * @param product_release Your product_release
    */
    USBCDC(USBPhy *phy, uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
 
    /**
     * Destroy this object
     *
     * Any classes which inherit from this class must call deinit
     * before this destructor runs.
     */
    virtual ~USBCDC();
 
    /**
     * Check if this class is ready
     *
     * @return true if a terminal is connected, false otherwise
     */
    bool ready();
 
    /**
     * Block until the terminal is connected
     */
    void wait_ready();
 
    /*
    * Send a buffer
    *
    * This function blocks until the full contents have been sent.
    *
    * @param buffer buffer to be sent
    * @param size length of the buffer
    * @returns true if successful false if interrupted due to a state change
    */
    bool send(uint8_t *buffer, uint32_t size);
 
    /**
     * Send what there is room for
     *
     * @param buffer data to send
     * @param size maximum number of bytes to send
     * @param actual a pointer to where to store the number of bytes sent
     * @param now true to start data transmission, false to wait
     */
    void send_nb(uint8_t *buffer, uint32_t size, uint32_t *actual, bool now = true);
 
    /*
    * Read a buffer from a certain endpoint. Warning: blocking
    *
    * Blocks until at least one byte of data has been read (actual != NULL) or
    * until the full size has been read (actual == NULL).
    *
    * @param buffer buffer where will be stored bytes
    * @param size the maximum number of bytes to read
    * @param actual A pointer to where to store the number of bytes actually read
    *   or NULL to read the full size
    * @returns true if successful false if interrupted due to a state change
    */
    bool receive(uint8_t *buffer, uint32_t size, uint32_t *actual = NULL);
 
    /**
     * Read from the receive buffer
     *
     * @param buffer buffer to fill with data
     * @param size maximum number of bytes read
     * @param actual a pointer to where to store the number of bytes actually received
     */
    void receive_nb(uint8_t *buffer, uint32_t size, uint32_t *actual);
 
protected:
    /*
    * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
    *
    * @returns pointer to the device descriptor
    */
    virtual const uint8_t *device_desc();
 
    /*
    * Get string product descriptor
    *
    * @returns pointer to the string product descriptor
    */
    virtual const uint8_t *string_iproduct_desc();
 
    /*
    * Get string interface descriptor
    *
    * @returns pointer to the string interface descriptor
    */
    virtual const uint8_t *string_iinterface_desc();
 
    /*
    * Get configuration descriptor
    *
    * @param index descriptor index
    * @returns pointer to the configuration descriptor
    */
    virtual const uint8_t *configuration_desc(uint8_t index);
 
    /*
    * Called by USBCallback_requestCompleted when CDC line coding is changed
    * Warning: Called in ISR
    *
    * @param baud The baud rate
    * @param bits The number of bits in a word (5-8)
    * @param parity The parity
    * @param stop The number of stop bits (1 or 2)
    */
    virtual void line_coding_changed(int baud, int bits, int parity, int stop) {};
 
    /*
     * Called when there is data that can be read
     */
    virtual void data_rx() {}
 
    /*
     * Called when there is space in the TX buffer
     */
    virtual void data_tx() {}
 
protected:
 
    class AsyncWrite;
    class AsyncRead;
    class AsyncWait;
 
    virtual void callback_reset();
    virtual void callback_state_change(DeviceState new_state);
    virtual void callback_request(const setup_packet_t *setup);
    virtual void callback_request_xfer_done(const setup_packet_t *setup, bool aborted);
    virtual void callback_set_configuration(uint8_t configuration);
    virtual void callback_set_interface(uint16_t interface, uint8_t alternate);
 
    void _init();
 
    void _change_terminal_connected(bool connected);
 
    void _send_isr_start();
    void _send_isr();
 
    void _receive_isr_start();
    void _receive_isr();
 
    usb_ep_t _bulk_in;
    usb_ep_t _bulk_out;
    usb_ep_t _int_in;
 
    uint8_t _cdc_line_coding[7];
    uint8_t _cdc_new_line_coding[7];
    uint8_t _config_descriptor[75];
 
    OperationList<AsyncWait> _connected_list;
    bool _terminal_connected;
 
    OperationList<AsyncWrite> _tx_list;
    bool _tx_in_progress;
    uint8_t _tx_buffer[CDC_MAX_PACKET_SIZE];
    uint8_t *_tx_buf;
    uint32_t _tx_size;
 
    OperationList<AsyncRead> _rx_list;
    bool _rx_in_progress;
    uint8_t _rx_buffer[CDC_MAX_PACKET_SIZE];
    uint8_t *_rx_buf;
    uint32_t _rx_size;
    bool _trans_zlp;
};
 
/** @}*/
 
#endif