Radio driver implementation for Semtech SX1272 plus variants. More...

#include <SX1272_LoRaRadio.h>

Inheritance diagram for SX1272_LoRaRadio:

Public Member Functions
	SX1272_LoRaRadio (PinName mosi=MBED_CONF_SX1272_LORA_DRIVER_SPI_MOSI, PinName miso=MBED_CONF_SX1272_LORA_DRIVER_SPI_MISO, PinName sclk=MBED_CONF_SX1272_LORA_DRIVER_SPI_SCLK, PinName nss=MBED_CONF_SX1272_LORA_DRIVER_SPI_CS, PinName reset=MBED_CONF_SX1272_LORA_DRIVER_RESET, PinName dio0=MBED_CONF_SX1272_LORA_DRIVER_DIO0, PinName dio1=MBED_CONF_SX1272_LORA_DRIVER_DIO1, PinName dio2=MBED_CONF_SX1272_LORA_DRIVER_DIO2, PinName dio3=MBED_CONF_SX1272_LORA_DRIVER_DIO3, PinName dio4=MBED_CONF_SX1272_LORA_DRIVER_DIO4, PinName dio5=MBED_CONF_SX1272_LORA_DRIVER_DIO5, PinName rf_switch_ctl1=MBED_CONF_SX1272_LORA_DRIVER_RF_SWITCH_CTL1, PinName rf_switch_ctl2=MBED_CONF_SX1272_LORA_DRIVER_RF_SWITCH_CTL2, PinName txctl=MBED_CONF_SX1272_LORA_DRIVER_TXCTL, PinName rxctl=MBED_CONF_SX1272_LORA_DRIVER_RXCTL, PinName ant_switch=MBED_CONF_SX1272_LORA_DRIVER_ANT_SWITCH, PinName pwr_amp_ctl=MBED_CONF_SX1272_LORA_DRIVER_PWR_AMP_CTL, PinName tcxo=MBED_CONF_SX1272_LORA_DRIVER_TCXO)
	Use this constructor if pin definitions are provided manually. More...

virtual	~SX1272_LoRaRadio ()
	Destructor. More...

virtual void	init_radio (radio_events_t *events)
	Registers radio events with the Mbed LoRaWAN stack and undergoes initialization steps if any. More...

virtual void	radio_reset ()
	Resets the radio module. More...

virtual void	sleep (void)
	Put the RF module in sleep mode. More...

virtual void	standby (void)
	Sets the radio in standby mode. More...

void	set_rx_config (radio_modems_t modem, uint32_t bandwidth, uint32_t datarate, uint8_t coderate, uint32_t bandwidth_afc, uint16_t preamble_len, uint16_t symb_timeout, bool fix_len, uint8_t payload_len, bool crc_on, bool freq_hop_on, uint8_t hop_period, bool iq_inverted, bool rx_continuous) override
	Sets reception parameters. More...

virtual void	set_tx_config (radio_modems_t modem, int8_t power, uint32_t fdev, uint32_t bandwidth, uint32_t datarate, uint8_t coderate, uint16_t preamble_len, bool fix_len, bool crc_on, bool freq_hop_on, uint8_t hop_period, bool iq_inverted, uint32_t timeout)
	Sets the transmission parameters. More...

virtual void	send (uint8_t *buffer, uint8_t size)
	Sends the buffer of size. More...

virtual void	receive (uint32_t timeout)
	For backwards compatibility. More...

virtual void	receive (void)
	Sets the radio to receive. More...

virtual void	set_channel (uint32_t freq)
	Sets the carrier frequency. More...

virtual uint32_t	random (void)
	Generates a 32 bits random value based on the RSSI readings. More...

radio_state_t	get_status (void) override
	Gets the radio status. More...

virtual void	set_max_payload_length (radio_modems_t modem, uint8_t max)
	Sets the maximum payload length. More...

virtual void	set_public_network (bool enable)
	Sets the network to public or private. More...

virtual uint32_t	time_on_air (radio_modems_t modem, uint8_t pkt_len)
	Computes the packet time on air for the given payload. More...

virtual bool	perform_carrier_sense (radio_modems_t modem, uint32_t freq, int16_t rssi_threshold, uint32_t max_carrier_sense_time)
	Perform carrier sensing. More...

virtual void	start_cad (void)
	Sets the radio in CAD mode. More...

virtual bool	check_rf_frequency (uint32_t frequency)
	Check if the given RF is in range. More...

virtual void	set_tx_continuous_wave (uint32_t freq, int8_t power, uint16_t time)
	Sets the radio in continuous wave transmission mode. More...

virtual void	lock (void)
	Acquire exclusive access. More...

virtual void	unlock (void)
	Release exclusive access. More...

Detailed Description

Radio driver implementation for Semtech SX1272 plus variants.

Supports only SPI at the moment. Implements pure virtual LoRaRadio class.

Definition at line 61 of file SX1272_LoRaRadio.h.

Constructor & Destructor Documentation

◆ SX1272_LoRaRadio()

SX1272_LoRaRadio	(	PinName	mosi = `MBED_CONF_SX1272_LORA_DRIVER_SPI_MOSI`,
		PinName	miso = `MBED_CONF_SX1272_LORA_DRIVER_SPI_MISO`,
		PinName	sclk = `MBED_CONF_SX1272_LORA_DRIVER_SPI_SCLK`,
		PinName	nss = `MBED_CONF_SX1272_LORA_DRIVER_SPI_CS`,
		PinName	reset = `MBED_CONF_SX1272_LORA_DRIVER_RESET`,
		PinName	dio0 = `MBED_CONF_SX1272_LORA_DRIVER_DIO0`,
		PinName	dio1 = `MBED_CONF_SX1272_LORA_DRIVER_DIO1`,
		PinName	dio2 = `MBED_CONF_SX1272_LORA_DRIVER_DIO2`,
		PinName	dio3 = `MBED_CONF_SX1272_LORA_DRIVER_DIO3`,
		PinName	dio4 = `MBED_CONF_SX1272_LORA_DRIVER_DIO4`,
		PinName	dio5 = `MBED_CONF_SX1272_LORA_DRIVER_DIO5`,
		PinName	rf_switch_ctl1 = `MBED_CONF_SX1272_LORA_DRIVER_RF_SWITCH_CTL1`,
		PinName	rf_switch_ctl2 = `MBED_CONF_SX1272_LORA_DRIVER_RF_SWITCH_CTL2`,
		PinName	txctl = `MBED_CONF_SX1272_LORA_DRIVER_TXCTL`,
		PinName	rxctl = `MBED_CONF_SX1272_LORA_DRIVER_RXCTL`,
		PinName	ant_switch = `MBED_CONF_SX1272_LORA_DRIVER_ANT_SWITCH`,
		PinName	pwr_amp_ctl = `MBED_CONF_SX1272_LORA_DRIVER_PWR_AMP_CTL`,
		PinName	tcxo = `MBED_CONF_SX1272_LORA_DRIVER_TCXO`
	)

Use this constructor if pin definitions are provided manually.

The pins that are marked NC are optional. It is assumed that these pins are not connected until/unless configured otherwise.

◆ ~SX1272_LoRaRadio()

virtual ~SX1272_LoRaRadio ( )

virtual

Destructor.

Member Function Documentation

◆ init_radio()

virtual void init_radio ( radio_events_t * events )

virtual

Registers radio events with the Mbed LoRaWAN stack and undergoes initialization steps if any.

Parameters

events Structure containing the driver callback functions

Implements LoRaRadio.

◆ radio_reset()

virtual void radio_reset ( )

virtual

Resets the radio module.

Implements LoRaRadio.

◆ sleep()

virtual void sleep ( void )

virtual

Put the RF module in sleep mode.

Implements LoRaRadio.

◆ standby()

virtual void standby ( void )

virtual

Sets the radio in standby mode.

Implements LoRaRadio.

◆ set_rx_config()

void set_rx_config	(	radio_modems_t	modem,
		uint32_t	bandwidth,
		uint32_t	datarate,
		uint8_t	coderate,
		uint32_t	bandwidth_afc,
		uint16_t	preamble_len,
		uint16_t	symb_timeout,
		bool	fix_len,
		uint8_t	payload_len,
		bool	crc_on,
		bool	freq_hop_on,
		uint8_t	hop_period,
		bool	iq_inverted,
		bool	rx_continuous
	)

overridevirtual

Sets reception parameters.

Parameters

modem	The radio modem [0: FSK, 1: LoRa].
bandwidth	Sets the bandwidth. FSK : >= 2600 and <= 250000 Hz LoRa: [0: 125 kHz, 1: 250 kHz, 2: 500 kHz, 3: Reserved]
datarate	Sets the datarate. FSK : 600..300000 bits/s LoRa: [6: 64, 7: 128, 8: 256, 9: 512, 10: 1024, 11: 2048, 12: 4096 chips]
coderate	Sets the coding rate (LoRa only). FSK : N/A ( set to 0 ) LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
bandwidth_afc	Sets the AFC bandwidth (FSK only). FSK : >= 2600 and <= 250000 Hz LoRa: N/A (set to 0)
preamble_len	Sets the preamble length (LoRa only). FSK : N/A (set to 0) LoRa: Length in symbols (the hardware adds four more symbols).
symb_timeout	Sets the RxSingle timeout value. FSK : Timeout number of bytes LoRa: Timeout in symbols
fix_len	Fixed length packets [0: variable, 1: fixed].
payload_len	Sets the payload length when fixed length is used.
crc_on	Enables/disables CRC [0: OFF, 1: ON].
freq_hop_on	Enables/disables intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only).
hop_period	The number of symbols bewteen each hop (LoRa only).
iq_inverted	Inverts the IQ signals (LoRa only). FSK : N/A (set to 0) LoRa: [0: not inverted, 1: inverted]
rx_continuous	Sets the reception to continuous mode. [false: single mode, true: continuous mode]

Implements LoRaRadio.

◆ set_tx_config()

virtual void set_tx_config	(	radio_modems_t	modem,
		int8_t	power,
		uint32_t	fdev,
		uint32_t	bandwidth,
		uint32_t	datarate,
		uint8_t	coderate,
		uint16_t	preamble_len,
		bool	fix_len,
		bool	crc_on,
		bool	freq_hop_on,
		uint8_t	hop_period,
		bool	iq_inverted,
		uint32_t	timeout
	)

virtual

Sets the transmission parameters.

Parameters

modem	Radio modem to be used [0: FSK, 1: LoRa]
power	Sets the output power [dBm]
fdev	Sets the frequency deviation ( FSK only ) FSK : [Hz] LoRa: 0
bandwidth	Sets the bandwidth ( LoRa only ) FSK : 0 LoRa: [0: 125 kHz, 1: 250 kHz, 2: 500 kHz, 3: Reserved]
datarate	Sets the Datarate FSK : 600..300000 bits/s LoRa: [6: 64, 7: 128, 8: 256, 9: 512, 10: 1024, 11: 2048, 12: 4096 chips]
coderate	Sets the coding rate ( LoRa only ) FSK : N/A ( set to 0 ) LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
preamble_len	Sets the preamble length
fix_len	Fixed length packets [0: variable, 1: fixed]
crc_on	Enables disables the CRC [0: OFF, 1: ON]
freq_hop_on	Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only)
hop_period	Number of symbols bewteen each hop (LoRa only)
iq_inverted	Inverts IQ signals ( LoRa only ) FSK : N/A ( set to 0 ) LoRa: [0: not inverted, 1: inverted]
timeout	Transmission timeout [ms]

Implements LoRaRadio.

◆ send()

virtual void send	(	uint8_t *	buffer,
		uint8_t	size
	)

virtual

Sends the buffer of size.

Prepares the packet to be sent and sets the radio in transmission

Parameters

buffer	Buffer pointer
size	Buffer size

Implements LoRaRadio.

◆ receive() [1/2]

virtual void receive ( uint32_t timeout )

virtual

For backwards compatibility.

Definition at line 172 of file SX1272_LoRaRadio.h.

◆ receive() [2/2]

virtual void receive ( void )

virtual

Sets the radio to receive.

All necessary configuration options for receptions are set in 'set_rx_config(parameters)' API.

Implements LoRaRadio.

◆ set_channel()

virtual void set_channel ( uint32_t freq )

virtual

Sets the carrier frequency.

Parameters

freq	Channel RF frequency

Implements LoRaRadio.

◆ random()

virtual uint32_t random ( void )

virtual

Generates a 32 bits random value based on the RSSI readings.

Remark this function sets the radio in LoRa modem mode and disables all interrupts. After calling this function either Radio.SetRxConfig or Radio.SetTxConfig functions must be called.

Returns: 32 bits random value

Implements LoRaRadio.

◆ get_status()

radio_state_t get_status ( void )

overridevirtual

Gets the radio status.

Returns: The current radio status (RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING, etc.)

Implements LoRaRadio.

◆ set_max_payload_length()

virtual void set_max_payload_length	(	radio_modems_t	modem,
		uint8_t	max
	)

virtual

Sets the maximum payload length.

Parameters

modem	Radio modem to be used [0: FSK, 1: LoRa]
max	Maximum payload length in bytes

Implements LoRaRadio.

◆ set_public_network()

virtual void set_public_network ( bool enable )

virtual

Sets the network to public or private.

Updates the sync byte. Applies to LoRa modem only

Parameters

enable if true, it enables a public network

Implements LoRaRadio.

◆ time_on_air()

virtual uint32_t time_on_air	(	radio_modems_t	modem,
		uint8_t	pkt_len
	)

virtual

Computes the packet time on air for the given payload.

Remark can only be called once SetRxConfig or SetTxConfig have been called

Parameters

modem	Radio modem to be used [0: FSK, 1: LoRa]
pkt_len	Packet payload length

Returns: Computed airTime for the given packet payload length

Implements LoRaRadio.

◆ perform_carrier_sense()

virtual bool perform_carrier_sense	(	radio_modems_t	modem,
		uint32_t	freq,
		int16_t	rssi_threshold,
		uint32_t	max_carrier_sense_time
	)

virtual

Perform carrier sensing.

Checks for a certain time if the RSSI is above a given threshold. This threshold determines if there is already a transmission going on in the channel or not.

Parameters

modem	Type of the radio modem
freq	Carrier frequency
rssi_threshold	Threshold value of RSSI
max_carrier_sense_time	time to sense the channel

Returns: true if there is no active transmission in the channel, false otherwise

Implements LoRaRadio.

◆ start_cad()

virtual void start_cad ( void )

virtual

Sets the radio in CAD mode.

Implements LoRaRadio.

◆ check_rf_frequency()

virtual bool check_rf_frequency ( uint32_t frequency )

virtual

Check if the given RF is in range.

Parameters

frequency frequency needed to be checked

Implements LoRaRadio.

◆ set_tx_continuous_wave()

virtual void set_tx_continuous_wave	(	uint32_t	freq,
		int8_t	power,
		uint16_t	time
	)

virtual

Sets the radio in continuous wave transmission mode.

Parameters

freq	Channel RF frequency
power	Sets the output power [dBm]
time	Transmission mode timeout [s]

Implements LoRaRadio.

◆ lock()

virtual void lock ( void )

virtual

Acquire exclusive access.

Implements LoRaRadio.

◆ unlock()

virtual void unlock ( void )

virtual

Release exclusive access.

Implements LoRaRadio.

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ SX1272_LoRaRadio()

◆ ~SX1272_LoRaRadio()

Member Function Documentation

◆ init_radio()

◆ radio_reset()

◆ sleep()

◆ standby()

◆ set_rx_config()

◆ set_tx_config()

◆ send()

◆ receive() [1/2]

◆ receive() [2/2]

◆ set_channel()

◆ random()

◆ get_status()

◆ set_max_payload_length()

◆ set_public_network()

◆ time_on_air()

◆ perform_carrier_sense()

◆ start_cad()

◆ check_rf_frequency()

◆ set_tx_continuous_wave()

◆ lock()

◆ unlock()