UDP socket implementation. More...

#include <UDPSocket.h>

Inheritance diagram for UDPSocket:

Public Member Functions
	UDPSocket ()
	Create an uninitialized socket. More...

nsapi_size_or_error_t	sendto (const SocketAddress &address, const void *data, nsapi_size_t size) override
	Send data to the specified address. More...

nsapi_size_or_error_t	recvfrom (SocketAddress address, void data, nsapi_size_t size) override
	Receive a datagram and store the source address in address if it's not NULL. More...

nsapi_size_or_error_t	sendto_control (const SocketAddress &address, const void data, nsapi_size_t size, nsapi_msghdr_t control, nsapi_size_t control_size) override
	Send datagram and ancillary data to the specified address. More...

nsapi_size_or_error_t	recvfrom_control (SocketAddress address, void data, nsapi_size_t size, nsapi_msghdr_t *control, nsapi_size_t control_size) override
	Receive a datagram with ancillary data and store the source address in address if it's not NULL. More...

nsapi_error_t	connect (const SocketAddress &address) override
	Set the remote address for next send() call and filtering of incoming packets. More...

nsapi_size_or_error_t	send (const void *data, nsapi_size_t size) override
	Send a raw data to connected remote address. More...

nsapi_size_or_error_t	recv (void *data, nsapi_size_t size) override
	Receive data from a socket. More...

Socket *	accept (nsapi_error_t *error=nullptr) override
	Not implemented for InternetDatagramSocket. More...

nsapi_error_t	listen (int backlog=1) override
	Not implemented for InternetDatagramSocket. More...

nsapi_error_t	open (NetworkStack *stack)
	Open a network socket on the network stack of the given network interface. More...

nsapi_error_t	close () override
	defined(DOXYGEN_ONLY) More...

int	join_multicast_group (const SocketAddress &address)
	Subscribe to an IP multicast group. More...

int	leave_multicast_group (const SocketAddress &address)
	Leave an IP multicast group. More...

int	get_rtt_estimate_to_address (const SocketAddress &address, uint32_t *rtt_estimate)
	Get estimated round trip time to destination address. More...

int	get_stagger_estimate_to_address (const SocketAddress &address, uint16_t data_amount, uint16_t stagger_min, uint16_t stagger_max, uint16_t *stagger_rand)
	Get estimated stagger value. More...

nsapi_error_t	bind (uint16_t port)
	Bind the socket to a port on which to receive data. More...

nsapi_error_t	bind (const SocketAddress &address) override
	Bind a specific address to a socket. More...

void	set_blocking (bool blocking) override
	Set blocking or non-blocking mode of the socket. More...

void	set_timeout (int timeout) override
	Set timeout on blocking socket operations. More...

nsapi_error_t	setsockopt (int level, int optname, const void *optval, unsigned optlen) override
	Set socket options. More...

nsapi_error_t	getsockopt (int level, int optname, void optval, unsigned optlen) override
	Get socket options. More...

void	sigio (mbed::Callback< void()> func) override
	Register a callback on state change of the socket. More...

nsapi_error_t	getpeername (SocketAddress *address) override
	Get the remote-end peer associated with this socket. More...

Detailed Description

UDP socket implementation.

Definition at line 34 of file UDPSocket.h.

Constructor & Destructor Documentation

◆ UDPSocket()

UDPSocket ( )

Create an uninitialized socket.

Note: Must call open to initialize the socket on a network stack.

Member Function Documentation

◆ sendto()

nsapi_size_or_error_t sendto	(	const SocketAddress &	address,
		const void *	data,
		nsapi_size_t	size
	)

overridevirtualinherited

Send data to the specified address.

By default, sendto blocks until data is sent. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

It uses sendto_control with zero ancillary data

Parameters

address	The SocketAddress of the remote host.
data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Return values

NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
int	Other negative error codes for stack-related failures. See NetworkStack::socket_send.

Implements Socket.

◆ recvfrom()

nsapi_size_or_error_t recvfrom	(	SocketAddress *	address,
		void *	data,
		nsapi_size_t	size
	)

overridevirtualinherited

Receive a datagram and store the source address in address if it's not NULL.

By default, recvfrom blocks until a datagram is received. If socket is set to nonblocking or times out with no datagram, NSAPI_ERROR_WOULD_BLOCK is returned.

Note: If the datagram is larger than the buffer, the excess data is silently discarded.; If socket is connected, only packets coming from connected peer address are accepted.; recvfrom() is allowed write to address and data buffers even if error occurs. It uses recvfrom_control with zero ancillary data

Parameters

address	Destination for the source address or NULL.
data	Destination buffer for RAW data to be received from the host.
size	Size of the buffer in bytes.

Return values

Number	of received bytes on success.
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
Other	negative error codes for stack-related failures. See NetworkStack::socket_recv.

Implements Socket.

◆ sendto_control()

nsapi_size_or_error_t sendto_control	(	const SocketAddress &	address,
		const void *	data,
		nsapi_size_t	size,
		nsapi_msghdr_t *	control,
		nsapi_size_t	control_size
	)

overridevirtualinherited

Send datagram and ancillary data to the specified address.

By default, sendto blocks until data is sent. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters

address	The SocketAddress of the remote host.
data	Buffer of data to send to the host.
size	Size of the buffer in bytes.
control	Control data, for instance a populated nsapi_pktinfo structure.
control_size	Size of `control` in bytes.

Return values

NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
int	Other negative error codes for stack-related failures. See NetworkStack::socket_send.

Implements Socket.

◆ recvfrom_control()

nsapi_size_or_error_t recvfrom_control	(	SocketAddress *	address,
		void *	data,
		nsapi_size_t	size,
		nsapi_msghdr_t *	control,
		nsapi_size_t	control_size
	)

overridevirtualinherited

Receive a datagram with ancillary data and store the source address in address if it's not NULL.

By default, recvfrom blocks until a datagram is received. If socket is set to nonblocking or times out with no datagram, NSAPI_ERROR_WOULD_BLOCK is returned.

Ancillary data is stored into control. The caller needs to allocate a buffer that is large enough to contain the data they want to receive, then pass the pointer in through the control member. The data will be filled into control, beginning with a header specifying what data was received. See MsgHeaderIterator for how to parse this data.

Note: If the datagram is larger than the buffer, the excess data is silently discarded.; If socket is connected, only packets coming from connected peer address are accepted.; recvfrom_control() is allowed write to address and data buffers even if error occurs.

Parameters

address	Destination for the source address or NULL.
data	Destination buffer for RAW data to be received from the host.
size	Size of the buffer in bytes.
control	Caller-allocated buffer to store ancillary data.
control_size	Size of the `control` buffer that the caller has allocated.

Return values

Number	of received bytes on success.
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
Other	negative error codes for stack-related failures. See NetworkStack::socket_recv.

Implements Socket.

◆ connect()

nsapi_error_t connect ( const SocketAddress & address )

overridevirtualinherited

Set the remote address for next send() call and filtering of incoming packets.

To reset the address, zero initialized SocketAddress must be in the address parameter.

Parameters

address The SocketAddress of the remote host.

Returns: NSAPI_ERROR_OK on success.

Implements Socket.

◆ send()

nsapi_size_or_error_t send	(	const void *	data,
		nsapi_size_t	size
	)

overridevirtualinherited

Send a raw data to connected remote address.

By default, send blocks until all data is sent. If socket is set to nonblocking or times out, a partial amount can be written. NSAPI_ERROR_WOULD_BLOCK is returned if no data was written.

Note: The socket must be connected to a remote host before send() call.

Parameters

data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Return values

Number	of sent bytes on success.
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
NSAPI_ERROR_NO_ADDRESS	if the address was not set with connect().
Other	negative error codes for stack-related failures. See NetworkStack::socket_send.

Implements Socket.

◆ recv()

nsapi_size_or_error_t recv	(	void *	data,
		nsapi_size_t	size
	)

overridevirtualinherited

Receive data from a socket.

This is equivalent to calling recvfrom(NULL, data, size).

By default, recv blocks until some data is received. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK can be returned to indicate no data.

Note: recv() is allowed write to data buffer even if error occurs.

Parameters

data	Pointer to buffer for data received from the host.
size	Size of the buffer in bytes.

Return values

Number	of received bytes on success.
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
Other	negative error codes for stack-related failures. See NetworkStack::socket_recv.

Implements Socket.

◆ accept()

Socket * accept ( nsapi_error_t * error = nullptr )

overridevirtualinherited

Not implemented for InternetDatagramSocket.

Parameters

error Not used.

Returns: NSAPI_ERROR_UNSUPPORTED

Implements Socket.

◆ listen()

nsapi_error_t listen ( int backlog = 1 )

overridevirtualinherited

Not implemented for InternetDatagramSocket.

Parameters

backlog Not used.

Returns: NSAPI_ERROR_UNSUPPORTED

Implements Socket.

◆ open()

nsapi_error_t open ( NetworkStack * stack )

inherited

Open a network socket on the network stack of the given network interface.

Note: Not needed if stack is passed to the socket's constructor.

Parameters

stack Network stack as target for socket.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_PARAMETER	in case the provided stack was invalid or a stack was already created and socket opened successfully.
int	negative error codes for stack-related failures. See NetworkStack::socket_open.

◆ close()

nsapi_error_t close ( )

overridevirtualinherited

defined(DOXYGEN_ONLY)

Close any open connection, and deallocate any memory associated with the socket. Called from destructor if socket is not closed.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	negative error codes for stack-related failures. See NetworkStack::socket_close.

Implements Socket.

◆ join_multicast_group()

int join_multicast_group ( const SocketAddress & address )

inherited

Subscribe to an IP multicast group.

Parameters

address Multicast group IP address.

Returns: NSAPI_ERROR_OK on success, negative error code on failure (

See also: InternetSocket::setsockopt).

◆ leave_multicast_group()

int leave_multicast_group ( const SocketAddress & address )

inherited

Leave an IP multicast group.

Parameters

address Multicast group IP address.

Returns: NSAPI_ERROR_OK on success, negative error code on failure (

See also: InternetSocket::setsockopt).

◆ get_rtt_estimate_to_address()

int get_rtt_estimate_to_address	(	const SocketAddress &	address,
		uint32_t *	rtt_estimate
	)

inherited

Get estimated round trip time to destination address.

Use estimated round trip time to adjust application retry timers to work in networks that have low data rate and high latency.

Parameters

address	Destination address to use in rtt estimate.
rtt_estimate	Returned round trip time value in milliseconds.

Returns: NSAPI_ERROR_OK on success.; NSAPI_ERROR_PARAMETER if the provided pointer is invalid.; negative error code on other failures (

See also: InternetSocket::getsockopt).

◆ get_stagger_estimate_to_address()

int get_stagger_estimate_to_address	(	const SocketAddress &	address,
		uint16_t	data_amount,
		uint16_t *	stagger_min,
		uint16_t *	stagger_max,
		uint16_t *	stagger_rand
	)

inherited

Get estimated stagger value.

Stagger value is a time that application should wait before using heavy network operations after connecting to network. Purpose of staggering is to avoid network congestion that may happen in low bandwith networks if multiple applications simultaneously start heavy network usage after joining to the network.

Parameters

address	Destination added used to estimate stagger value.
data_amount	Amount of bytes to transfer in kilobytes.
stagger_min	Minimum stagger value in seconds.
stagger_max	Maximum stagger value in seconds.
stagger_rand	Randomized stagger value between stagger_min and stagger_max in seconds.

Returns: NSAPI_ERROR_OK on success.; negative error code on other failures (

See also: InternetSocket::getsockopt).

◆ bind() [1/2]

nsapi_error_t bind ( uint16_t port )

inherited

Bind the socket to a port on which to receive data.

Parameters

port	Local port to bind.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	negative error codes for stack-related failures. See NetworkStack::socket_bind.

◆ bind() [2/2]

nsapi_error_t bind ( const SocketAddress & address )

overridevirtualinherited

Bind a specific address to a socket.

Binding a socket specifies the address and port on which to receive data. If the IP address is zeroed, only the port is bound.

Parameters

address Local address to bind.

Returns: NSAPI_ERROR_OK on success, negative subclass-dependent error code on failure.

Implements Socket.

◆ set_blocking()

void set_blocking ( bool blocking )

overridevirtualinherited

Set blocking or non-blocking mode of the socket.

Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they cannot continue.

set_blocking(false) is equivalent to set_timeout(0) set_blocking(true) is equivalent to set_timeout(-1)

Parameters

blocking true for blocking mode, false for non-blocking mode.

Implements Socket.

◆ set_timeout()

void set_timeout ( int timeout )

overridevirtualinherited

Set timeout on blocking socket operations.

Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value gives the socket an unbounded timeout.

set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)

Parameters

timeout Timeout in milliseconds

Implements Socket.

◆ setsockopt()

nsapi_error_t setsockopt	(	int	level,
		int	optname,
		const void *	optval,
		unsigned	optlen
	)

overridevirtualinherited

Set socket options.

setsockopt() allows an application to pass stack-specific options to the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Option value.
optlen	Length of the option value.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
Negative	error code on failure, see NetworkStack::setsockopt

Implements Socket.

◆ getsockopt()

nsapi_error_t getsockopt	(	int	level,
		int	optname,
		void *	optval,
		unsigned *	optlen
	)

overridevirtualinherited

Get socket options.

getsockopt() allows an application to retrieve stack-specific options from the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Destination for option value.
optlen	Length of the option value.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
Negative	error code on failure, see NetworkStack::getsockopt

Implements Socket.

◆ sigio()

void sigio ( mbed::Callback< void()> func )

overridevirtualinherited

Register a callback on state change of the socket.

The specified callback is called on state changes, such as when the socket can receive/send/accept successfully and when an error occurs. The callback may also be called spuriously without reason.

The callback may be called in an interrupt context and should not perform expensive operations such as receive/send calls.

Note! This is not intended as a replacement for a poll or attach-like asynchronous API, but rather as a building block for constructing such functionality. The exact timing of the registered function is not guaranteed and susceptible to change.

Parameters

func	Function to call on state change.

Implements Socket.

◆ getpeername()

nsapi_error_t getpeername ( SocketAddress * address )

overridevirtualinherited

Get the remote-end peer associated with this socket.

Copy the remote peer address to a SocketAddress structure pointed by address parameter. Socket must be connected to have a peer address associated.

Parameters

address Pointer to SocketAddress structure.

Return values

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not connected.
NSAPI_ERROR_NO_CONNECTION	if the remote peer was not set.

Implements Socket.

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ UDPSocket()

Member Function Documentation

◆ sendto()

◆ recvfrom()

◆ sendto_control()

◆ recvfrom_control()

◆ connect()

◆ send()

◆ recv()

◆ accept()

◆ listen()

◆ open()

◆ close()

◆ join_multicast_group()

◆ leave_multicast_group()

◆ get_rtt_estimate_to_address()

◆ get_stagger_estimate_to_address()

◆ bind() [1/2]

◆ bind() [2/2]

◆ set_blocking()

◆ set_timeout()

◆ setsockopt()

◆ getsockopt()

◆ sigio()

◆ getpeername()