BlockDevice for I2C based flash device such as Microchip's 24LC or ATMEL's AT24C ranges. More...

#include <I2CEEBlockDevice.h>

Inheritance diagram for I2CEEBlockDevice:

Public Member Functions
	I2CEEBlockDevice (PinName sda, PinName scl, uint8_t address, mbed::bd_size_t size, mbed::bd_size_t block=32, int bus_speed=400000, bool address_is_eight_bit=false)
	Constructor to create an I2CEEBlockDevice on I2C pins. More...

	I2CEEBlockDevice (mbed::I2C *i2c_obj, uint8_t address, mbed::bd_size_t size, mbed::bd_size_t block=32, bool address_is_eight_bit=false)
	Constructor to create an I2CEEBlockDevice using the pins and frequency of an existing I2C bus. More...

virtual	~I2CEEBlockDevice ()
	Destructor of I2CEEBlockDevice. More...

virtual int	init ()
	Initialize a block device. More...

virtual int	deinit ()
	Deinitialize a block device. More...

virtual int	read (void *buffer, mbed::bd_addr_t addr, mbed::bd_size_t size)
	Read blocks from a block device. More...

virtual int	program (const void *buffer, mbed::bd_addr_t addr, mbed::bd_size_t size)
	Program blocks to a block device. More...

virtual int	erase (mbed::bd_addr_t addr, mbed::bd_size_t size)
	Erase blocks on a block device. More...

virtual mbed::bd_size_t	get_read_size () const
	Get the size of a readable block. More...

virtual mbed::bd_size_t	get_program_size () const
	Get the size of a programable block. More...

virtual mbed::bd_size_t	get_erase_size () const
	Get the size of a eraseable block. More...

virtual mbed::bd_size_t	size () const
	Get the total size of the underlying device. More...

virtual const char *	get_type () const
	Get the BlockDevice class type. More...

virtual int	sync ()
	Ensure data on storage is in sync with the driver. More...

virtual int	trim (bd_addr_t addr, bd_size_t size)
	Mark blocks as no longer in use. More...

virtual bd_size_t	get_erase_size (bd_addr_t addr) const
	Get the size of an erasable block given address. More...

virtual int	get_erase_value () const
	Get the value of storage when erased. More...

virtual bool	is_valid_read (bd_addr_t addr, bd_size_t size) const
	Convenience function for checking block read validity. More...

virtual bool	is_valid_program (bd_addr_t addr, bd_size_t size) const
	Convenience function for checking block program validity. More...

virtual bool	is_valid_erase (bd_addr_t addr, bd_size_t size) const
	Convenience function for checking block erase validity. More...

Static Public Member Functions
static BlockDevice *	get_default_instance ()
	Return the default block device. More...

Detailed Description

BlockDevice for I2C based flash device such as Microchip's 24LC or ATMEL's AT24C ranges.

// Here's an example using a 24LC256 on a GR PEACH
#include "mbed.h"
#include "I2CEEBlockDevice.h"
 
// Create EEPROM device on I2C bus with 32kbytes of memory
I2CEEBlockDevice i2cee(D14, D15, 0xa0, 32*1024);
 
int main() {
    printf("i2cee test\n");
 
    // Initialize the device and print the memory layout
    i2cee.init();
    printf("i2cee size: %llu\n",         i2cee.size());
    printf("i2cee read size: %llu\n",    i2cee.get_read_size());
    printf("i2cee program size: %llu\n", i2cee.get_program_size());
    printf("i2cee erase size: %llu\n",   i2cee.get_erase_size());
 
    // Write "Hello World!" to the first block
    char *buffer = (char*)malloc(i2cee.get_erase_size());
    sprintf(buffer, "Hello World!\n");
    i2cee.erase(0, i2cee.get_erase_size());
    i2cee.program(buffer, 0, i2cee.get_erase_size());
 
    // Read back what was stored
    i2cee.read(buffer, 0, i2cee.get_erase_size());
    printf("%s", buffer);
 
    // Deinitialize the device
    i2cee.deinit();
}

Definition at line 59 of file I2CEEBlockDevice.h.

Constructor & Destructor Documentation

◆ I2CEEBlockDevice() [1/2]

I2CEEBlockDevice	(	PinName	sda,
		PinName	scl,
		uint8_t	address,
		mbed::bd_size_t	size,
		mbed::bd_size_t	block = `32`,
		int	bus_speed = `400000`,
		bool	address_is_eight_bit = `false`
	)

Constructor to create an I2CEEBlockDevice on I2C pins.

Parameters

sda	The pin name for the sda line of the I2C bus.
scl	The pin name for the scl line of the I2C bus.
address	The 8bit I2C address of the chip, common range 0xa0 - 0xae.
size	The size of the device in bytes
block	The page size of the device in bytes, defaults to 32bytes
bus_speed	The frequency of the I2C bus, defaults to 400kHz.
address_is_eight_bit	Specifies whether the EEPROM device is using eight bit addresses instead of 16 bit addresses. This is used for example in AT24C series chips.

◆ I2CEEBlockDevice() [2/2]

I2CEEBlockDevice	(	mbed::I2C *	i2c_obj,
		uint8_t	address,
		mbed::bd_size_t	size,
		mbed::bd_size_t	block = `32`,
		bool	address_is_eight_bit = `false`
	)

Constructor to create an I2CEEBlockDevice using the pins and frequency of an existing I2C bus.

Parameters

i2c_obj	The I2C instance pointer
address	The 8bit I2C address of the chip, common range 0xa0 - 0xae.
size	The size of the device in bytes
block	The page size of the device in bytes, defaults to 32bytes
address_is_eight_bit	Specifies whether the EEPROM device is using eight bit addresses instead of 16 bit addresses. This is used for example in AT24C series chips.

◆ ~I2CEEBlockDevice()

virtual ~I2CEEBlockDevice ( )

virtual

Destructor of I2CEEBlockDevice.

Member Function Documentation

◆ init()

virtual int init ( )

virtual

Initialize a block device.

Returns: 0 on success or a negative error code on failure

Implements BlockDevice.

◆ deinit()

virtual int deinit ( )

virtual

Deinitialize a block device.

Returns: 0 on success or a negative error code on failure

Implements BlockDevice.

◆ read()

virtual int read	(	void *	buffer,
		mbed::bd_addr_t	addr,
		mbed::bd_size_t	size
	)

virtual

Read blocks from a block device.

Parameters

buffer	Buffer to write blocks to
addr	Address of block to begin reading from
size	Size to read in bytes, must be a multiple of read block size

Returns: 0 on success, negative error code on failure

Implements BlockDevice.

◆ program()

virtual int program	(	const void *	buffer,
		mbed::bd_addr_t	addr,
		mbed::bd_size_t	size
	)

virtual

Program blocks to a block device.

The blocks must have been erased prior to being programmed

Parameters

buffer	Buffer of data to write to blocks
addr	Address of block to begin writing to
size	Size to write in bytes, must be a multiple of program block size

Returns: 0 on success, negative error code on failure

Implements BlockDevice.

◆ erase()

virtual int erase	(	mbed::bd_addr_t	addr,
		mbed::bd_size_t	size
	)

virtual

Erase blocks on a block device.

The state of an erased block is undefined until it has been programmed

Parameters

addr	Address of block to begin erasing
size	Size to erase in bytes, must be a multiple of erase block size

Returns: 0 on success, negative error code on failure

Reimplemented from BlockDevice.

◆ get_read_size()

virtual mbed::bd_size_t get_read_size ( ) const

virtual

Get the size of a readable block.

Returns: Size of a readable block in bytes

Implements BlockDevice.

◆ get_program_size()

virtual mbed::bd_size_t get_program_size ( ) const

virtual

Get the size of a programable block.

Returns: Size of a programable block in bytes

Note: Must be a multiple of the read size

Implements BlockDevice.

◆ get_erase_size() [1/2]

virtual mbed::bd_size_t get_erase_size ( ) const

virtual

Get the size of a eraseable block.

Returns: Size of a eraseable block in bytes

Note: Must be a multiple of the program size

Reimplemented from BlockDevice.

◆ size()

virtual mbed::bd_size_t size ( ) const

virtual

Get the total size of the underlying device.

Returns: Size of the underlying device in bytes

Implements BlockDevice.

◆ get_type()

virtual const char * get_type ( ) const

virtual

Get the BlockDevice class type.

Returns: A string representation of the BlockDevice class type.

Implements BlockDevice.

◆ get_default_instance()

static BlockDevice * get_default_instance ( )

staticinherited

Return the default block device.

Returns the default block device based on the configuration JSON. Use the components in target.json or application config to change the default block device.

An application can override all target settings by implementing BlockDevice::get_default_instance() - the default definition is weak, and calls get_target_default_instance().

◆ sync()

virtual int sync ( )

virtualinherited

Ensure data on storage is in sync with the driver.

Returns: 0 on success or a negative error code on failure

Reimplemented in BufferedBlockDevice, ChainingBlockDevice, ExhaustibleBlockDevice, FlashSimBlockDevice, MBRBlockDevice, ObservingBlockDevice, ProfilingBlockDevice, ReadOnlyBlockDevice, and SlicingBlockDevice.

Definition at line 88 of file BlockDevice.h.

◆ trim()

virtual int trim	(	bd_addr_t	addr,
		bd_size_t	size
	)

virtualinherited

Mark blocks as no longer in use.

This function provides a hint to the underlying block device that a region of blocks is no longer in use and may be erased without side effects. Erase must still be called before programming, but trimming allows flash-translation-layers to schedule erases when the device is not busy.

Parameters

addr	Address of block to mark as unused
size	Size to mark as unused in bytes, must be a multiple of the erase block size

Returns: 0 on success or a negative error code on failure

Reimplemented in BufferedBlockDevice, and SDBlockDevice.

Definition at line 142 of file BlockDevice.h.

◆ get_erase_size() [2/2]

virtual bd_size_t get_erase_size ( bd_addr_t addr ) const

virtualinherited

Get the size of an erasable block given address.

Parameters

addr	Address within the erasable block

Returns: Size of an erasable block in bytes

Note: Must be a multiple of the program size

Reimplemented in BufferedBlockDevice, ChainingBlockDevice, ExhaustibleBlockDevice, FlashSimBlockDevice, HeapBlockDevice, MBRBlockDevice, ObservingBlockDevice, ProfilingBlockDevice, ReadOnlyBlockDevice, SlicingBlockDevice, DataFlashBlockDevice, QSPIFBlockDevice, SPIFBlockDevice, and FlashIAPBlockDevice.

Definition at line 176 of file BlockDevice.h.

◆ get_erase_value()

virtual int get_erase_value ( ) const

virtualinherited

Get the value of storage when erased.

If get_erase_value returns a non-negative byte value, the underlying storage is set to that value when erased, and storage containing that value can be programmed without another erase.

Returns: The value of storage when erased, or -1 if you can't rely on the value of the erased storage

Reimplemented in OSPIFBlockDevice, QSPIFBlockDevice, SPIFBlockDevice, BufferedBlockDevice, ChainingBlockDevice, ExhaustibleBlockDevice, FlashSimBlockDevice, MBRBlockDevice, ObservingBlockDevice, ProfilingBlockDevice, ReadOnlyBlockDevice, SlicingBlockDevice, and FlashIAPBlockDevice.

Definition at line 190 of file BlockDevice.h.

◆ is_valid_read()

virtual bool is_valid_read	(	bd_addr_t	addr,
		bd_size_t	size
	)		const

virtualinherited

Convenience function for checking block read validity.

Parameters

addr	Address of block to begin reading from
size	Size to read in bytes

Returns: True if read is valid for underlying block device

Reimplemented in SlicingBlockDevice.

Definition at line 207 of file BlockDevice.h.

◆ is_valid_program()

virtual bool is_valid_program	(	bd_addr_t	addr,
		bd_size_t	size
	)		const

virtualinherited

Convenience function for checking block program validity.

Parameters

addr	Address of block to begin writing to
size	Size to write in bytes

Returns: True if program is valid for underlying block device

Reimplemented in SlicingBlockDevice.

Definition at line 221 of file BlockDevice.h.

◆ is_valid_erase()

virtual bool is_valid_erase	(	bd_addr_t	addr,
		bd_size_t	size
	)		const

virtualinherited

Convenience function for checking block erase validity.

Parameters

addr	Address of block to begin erasing
size	Size to erase in bytes

Returns: True if erase is valid for underlying block device

Reimplemented in SlicingBlockDevice, and FlashIAPBlockDevice.

Definition at line 235 of file BlockDevice.h.

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ I2CEEBlockDevice() [1/2]

◆ I2CEEBlockDevice() [2/2]

◆ ~I2CEEBlockDevice()

Member Function Documentation

◆ init()

◆ deinit()

◆ read()

◆ program()

◆ erase()

◆ get_read_size()

◆ get_program_size()

◆ get_erase_size() [1/2]

◆ size()

◆ get_type()

◆ get_default_instance()

◆ sync()

◆ trim()

◆ get_erase_size() [2/2]

◆ get_erase_value()

◆ is_valid_read()

◆ is_valid_program()

◆ is_valid_erase()